Mô đun sạc pin 3.6/4.2V TP5000 Lithium Ion LiFePO4 chất lượng cao
41.000
₫ 29.000
Sản phẩm Mô đun sạc pin 3.6/4.2V TP5000 Lithium Ion LiFePO4 chất lượng cao đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 41.000 xuống còn ₫ 29.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Switch buck mode has higher efficiency and fever than linear charging circuit. Charging current 1A, in constant current charge to maintain 1A. No additional heat dissipation is needed, which reduces the influence of heating on charging current. Reduce charging time. Ordinary lithium-ion lithium polymer batteries or lithium iron phosphate batteries can be selected. Only one jumper is needed to change the settings.
Specifications:
Material: ABS
Size: 21.5*14.5*4.2mm/0.85*0.57*0.17"
Input: 4.5-9V
Output voltage: 4.2V/3.6V±1% (PCB default lithium-ion battery 4.2V)
Output current: default 1A
Usage:
1. Lithium batteries only need to be connected with 5V power supply and output B+B-to be connected with batteries. In charging, the red light is on, the charge is full and the green light is on after charging.
2. For lithium iron phosphate batteries of 3.6V, only soldering iron is needed to open the tin spot between the two soldering pads. The connection method of the power battery is unchanged as described above. If it is necessary to recharge 4.2V lithium batteries, the solder pad can be dipped and soldered to connect the batteries.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
Included:
1 XBattery Charging
Switch buck mode has higher efficiency and fever than linear charging circuit. Charging current 1A, in constant current charge to maintain 1A. No additional heat dissipation is needed, which reduces the influence of heating on charging current. Reduce charging time. Ordinary lithium-ion lithium polymer batteries or lithium iron phosphate batteries can be selected. Only one jumper is needed to change the settings.
Specifications:
Material: ABS
Size: 21.5*14.5*4.2mm/0.85*0.57*0.17"
Input: 4.5-9V
Output voltage: 4.2V/3.6V±1% (PCB default lithium-ion battery 4.2V)
Output current: default 1A
Usage:
1. Lithium batteries only need to be connected with 5V power supply and output B+B-to be connected with batteries. In charging, the red light is on, the charge is full and the green light is on after charging.
2. For lithium iron phosphate batteries of 3.6V, only soldering iron is needed to open the tin spot between the two soldering pads. The connection method of the power battery is unchanged as described above. If it is necessary to recharge 4.2V lithium batteries, the solder pad can be dipped and soldered to connect the batteries.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
Included:
1 XBattery Charging
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000