Mô Đun Rơ Le Lập Trình Thời Gian T2310 Dc 12v 24v Ac 110-220v
402.800
₫ 202.400
Sản phẩm Mô Đun Rơ Le Lập Trình Thời Gian T2310 Dc 12v 24v Ac 110-220v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 402.800 xuống còn ₫ 202.400, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to #domybestshop
You can find all kinds of products here!
Come and shop fun together
T2310 Programmable Digital Time Delay Switch Relay DC 12V 24V AC 110-220V Normally Open Timer Control Module 0-999 Second Min Hour
Specification:
Temperature control range: -55°C~+120°C/-67°F~ +248°F
Temperature control accuracy: 0.1°C/0.1°F
Display color: red + blue
Power supply: DC 12V, DC 24V, AC 110V~220V (Optional)
Sensor: NTC 10K 1 meter (including probe)
Product size: 79.2mmx41.9mmx26.3mm/3.13x1.65x1.04"
Hole size: 72.1mmx39.2mm/2.84x1.54"
Product weight: 52g (12V/24V), 59g (110V~220V)
Operation guide
-Short press the "SET" small digital tube flashes, press "up" or "down" to set the target temperature, press the "standby" button or no operation within 3 seconds to save the setting.
-Long press "SET" to enter the code setting mode, press "up" or "down" to switch the code, short press "SET" to enter the code setting after selection, press the "standby" button after setting or save the setting without operation within 3 seconds .
-The last parameter setting is saved by default after shutdown.
-Restore factory settings: press and hold "SET" to power on.
-The module starts directly when the module is powered on. After powering on, long press the "standby" button, the module enters "sleep" or "wake up"; in the event of a power failure, the module runs automatically after the power is restored, without manual startup.
Warning code:
Code Reason Solution
HHH The temperature exceeds the alarm temperature and the temperature drops below the alarm temperature to return to normal
LLL cannot detect the temperature sensor. Replace the product and reconnect the temperature sensor.
Indicator light:
Color situation
Red red light is flashing, heating mode is starting delay; red light is always on and heating mode is running
Blue The blue light is flashing, the cooling mode is delaying start; the blue light is always on and the cooling mode is running
Notice:
The working power supply voltage must be connected in accordance with the label standard voltage, otherwise the module will be easily damaged
Note:
-There may be slight size deviations due to manual measurement, different measuring methods and tools.
-The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Included:
1 X Digital Time Delay Switch Module
1 X M
You can find all kinds of products here!
Come and shop fun together
T2310 Programmable Digital Time Delay Switch Relay DC 12V 24V AC 110-220V Normally Open Timer Control Module 0-999 Second Min Hour
Specification:
Temperature control range: -55°C~+120°C/-67°F~ +248°F
Temperature control accuracy: 0.1°C/0.1°F
Display color: red + blue
Power supply: DC 12V, DC 24V, AC 110V~220V (Optional)
Sensor: NTC 10K 1 meter (including probe)
Product size: 79.2mmx41.9mmx26.3mm/3.13x1.65x1.04"
Hole size: 72.1mmx39.2mm/2.84x1.54"
Product weight: 52g (12V/24V), 59g (110V~220V)
Operation guide
-Short press the "SET" small digital tube flashes, press "up" or "down" to set the target temperature, press the "standby" button or no operation within 3 seconds to save the setting.
-Long press "SET" to enter the code setting mode, press "up" or "down" to switch the code, short press "SET" to enter the code setting after selection, press the "standby" button after setting or save the setting without operation within 3 seconds .
-The last parameter setting is saved by default after shutdown.
-Restore factory settings: press and hold "SET" to power on.
-The module starts directly when the module is powered on. After powering on, long press the "standby" button, the module enters "sleep" or "wake up"; in the event of a power failure, the module runs automatically after the power is restored, without manual startup.
Warning code:
Code Reason Solution
HHH The temperature exceeds the alarm temperature and the temperature drops below the alarm temperature to return to normal
LLL cannot detect the temperature sensor. Replace the product and reconnect the temperature sensor.
Indicator light:
Color situation
Red red light is flashing, heating mode is starting delay; red light is always on and heating mode is running
Blue The blue light is flashing, the cooling mode is delaying start; the blue light is always on and the cooling mode is running
Notice:
The working power supply voltage must be connected in accordance with the label standard voltage, otherwise the module will be easily damaged
Note:
-There may be slight size deviations due to manual measurement, different measuring methods and tools.
-The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Included:
1 X Digital Time Delay Switch Module
1 X M
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000