Mô Đun Rơ Le Cách Ly Quang 5v 1 2 4 8 Kênh 5v
₫ 25.342
Sản phẩm Mô Đun Rơ Le Cách Ly Quang 5v 1 2 4 8 Kênh 5v đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Module description:
1. The module adopts genuine high quality relay, the maximum load of normally open interface: AC 250V/10A, DC 30V/10A;
2. Using patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA;
3. Module working voltage is available in 5V/12V/24V. Please select the corresponding version according to the actual situation. Contact us for details.
4. The module can be triggered by a jumper to set a high level or a low level;
5. Fault-tolerant design, even if the control line is broken, the relay will not move;
6. Double indicator light, power indicator light, relay status indicator
7. The interface design is user-friendly, all interfaces can be directly connected through the terminal block, which is very convenient.
8. There are 4 fixing bolt holes, the hole is 3.1mm, the spacing is 44.5mm*20.5mm
Module interface:
DC+: Connect to the positive pole of the power supply (the voltage is required by the relay, there are 5V.12V and 24V selection)
DC-: connected to the negative pole of the power supply
IN: can control the relay to pull in high or low level
Relay output:
NO: The relay normally open interface, the relay is suspended before the suction, and the short is connected with COM after the suction.
COM: Relay common interface
NC: The relay normally closes the interface, and the relay is shorted to COM before the suction is closed.
High and low trigger selection:
1. When the jumper is shorted to low, it is triggered by a low level;
2. When the jumper is shorted to high, it is triggered by a high l
1. The module adopts genuine high quality relay, the maximum load of normally open interface: AC 250V/10A, DC 30V/10A;
2. Using patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA;
3. Module working voltage is available in 5V/12V/24V. Please select the corresponding version according to the actual situation. Contact us for details.
4. The module can be triggered by a jumper to set a high level or a low level;
5. Fault-tolerant design, even if the control line is broken, the relay will not move;
6. Double indicator light, power indicator light, relay status indicator
7. The interface design is user-friendly, all interfaces can be directly connected through the terminal block, which is very convenient.
8. There are 4 fixing bolt holes, the hole is 3.1mm, the spacing is 44.5mm*20.5mm
Module interface:
DC+: Connect to the positive pole of the power supply (the voltage is required by the relay, there are 5V.12V and 24V selection)
DC-: connected to the negative pole of the power supply
IN: can control the relay to pull in high or low level
Relay output:
NO: The relay normally open interface, the relay is suspended before the suction, and the short is connected with COM after the suction.
COM: Relay common interface
NC: The relay normally closes the interface, and the relay is shorted to COM before the suction is closed.
High and low trigger selection:
1. When the jumper is shorted to low, it is triggered by a low level;
2. When the jumper is shorted to high, it is triggered by a high l