【READY STOCK】Mô Đun Rfid Ic Mfrc-522 Rc-522 Rc522 Cho Arduino Spi


₫ 47.200

Sản phẩm 【READY STOCK】Mô Đun Rfid Ic Mfrc-522 Rc-522 Rc522 Cho Arduino Spi đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam

【RC522 chip】

MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation For products. MFRC522 support For series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.



【RFID module】

The MF522-AN module the the original MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader;



【Electrical parameters】

Operating current :13-26mA/DC 3.3V
Idle current :10-13mA/DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating Frequency: 13.56MHz

Supported card types: For mifare1 S50,For mifare1 S70 For Ultralight, For Pro, For DESFire
Product physical characteristics: size: 40mm×60mm
Environmental Operating temperature: -20-80 degrees Celsius
Environmental Storage Temperature: -40-85 degrees Celsius
Relative humidity: relative humidity 5% -95%

Module interfaces SPI Parameter

Data transfer rate: maximum 10Mbit/s



Shipping List:

1xa RFID-RC522 module
1x the standard S50 blank card
1xS50 special-shaped card a (as shown by the key ring shape)
1xstraight, curved rows of pin of the article


#DIYMORE #MFRC-522 #RC-522 #RC522 #Antenna #RFID #IC #Wireless #Module #For #Arduino #SPI #Writer #Reader #IC #Card #Proximity #M