Mô-Đun Màn Hình Lcd Tft 1.8 Inch Với Cổng Kết Nối 4 Io
129.732
₫ 92.110
Sản phẩm Mô-Đun Màn Hình Lcd Tft 1.8 Inch Với Cổng Kết Nối 4 Io đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 129.732 xuống còn ₫ 92.110, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
QD-TFT180 series module features:
Module with voltage regulator IC supports 3.2V/5V power supply,
With SD card holder, you can do experiments such as digital photo frame,
The module reserves the Nokia3310/5110 interface, supports the 1602 interface, and can be used directly!
IO for simplified wiring: (only 3 IOs after optimization)
1.RST--This IO can be saved when directly connected to the reset signal terminal of the microcontroller
2. D/C--connect low level, this chip can save IO if chip selection is effective for a long time
3.D/C--connect IO control register selection
4.DIN--connect IO to control data transmission
5.CLK--connect IO to control SPI bus
6.BL--When the high-level film 3.3V backlight is always on, this IO can be saved
IO for standard wiring: (6 IOs)
1.RST--connect IO to control LCD reset
2.CE--Connect IO to control chip selection
3.D/C--connect IO control register selection
4.DIN--connect IO to control data transmission
5.CLK--connect IO to control SPI bus
6.BL--Connect IO to control the backlight on or off or PWM to control the brightness
LCD screen parameters:
Resolution: 128X160!
Driver IC: ILI9163/ST7735
Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.
When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin
Module with voltage regulator IC supports 3.2V/5V power supply,
With SD card holder, you can do experiments such as digital photo frame,
The module reserves the Nokia3310/5110 interface, supports the 1602 interface, and can be used directly!
IO for simplified wiring: (only 3 IOs after optimization)
1.RST--This IO can be saved when directly connected to the reset signal terminal of the microcontroller
2. D/C--connect low level, this chip can save IO if chip selection is effective for a long time
3.D/C--connect IO control register selection
4.DIN--connect IO to control data transmission
5.CLK--connect IO to control SPI bus
6.BL--When the high-level film 3.3V backlight is always on, this IO can be saved
IO for standard wiring: (6 IOs)
1.RST--connect IO to control LCD reset
2.CE--Connect IO to control chip selection
3.D/C--connect IO control register selection
4.DIN--connect IO to control data transmission
5.CLK--connect IO to control SPI bus
6.BL--Connect IO to control the backlight on or off or PWM to control the brightness
LCD screen parameters:
Resolution: 128X160!
Driver IC: ILI9163/ST7735
Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.
When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000