Mô Đun Màn Hình Cảm Ứng Lcd 2.2 "Tft Cho Arduino
156.100
₫ 114.700
Sản phẩm Mô Đun Màn Hình Cảm Ứng Lcd 2.2 "Tft Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 156.100 xuống còn ₫ 114.700, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Descriptions:
This is a 2.2 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult.
With GPRS module, you can design your Arduino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
Can use it directly to display characters, graphics and BMP format images.
Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo)
LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day.
Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Specifications:
Arduino library: UTFT
Driver IC: ILI9225
Touch screen type: resistive touchscreen
Touch Pen: length is 9cm
Resolution: 176X220, 16-bit (262,000) color
Display size: 2.2 inch
Operating voltage: 3.3V
Logic level: 3.3V
Operating current: the maximum is 150mA
Size: 6.7x4.7cm/2.64x1.85inch
Quantity: 1 Set
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Download ip:http://www.winddeal.net/image2/tools/1A40587.rar
Package includes:
1 Pc x Breakout Board
1 Pc x Touc
This is a 2.2 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult.
With GPRS module, you can design your Arduino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
Can use it directly to display characters, graphics and BMP format images.
Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo)
LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day.
Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Specifications:
Arduino library: UTFT
Driver IC: ILI9225
Touch screen type: resistive touchscreen
Touch Pen: length is 9cm
Resolution: 176X220, 16-bit (262,000) color
Display size: 2.2 inch
Operating voltage: 3.3V
Logic level: 3.3V
Operating current: the maximum is 150mA
Size: 6.7x4.7cm/2.64x1.85inch
Quantity: 1 Set
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Download ip:http://www.winddeal.net/image2/tools/1A40587.rar
Package includes:
1 Pc x Breakout Board
1 Pc x Touc
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000