Mô đun màn hình cảm ứng 3.3V TFT LCD 2.0" kèm bút cho Arduino
101.000
₫ 68.928
Sản phẩm Mô đun màn hình cảm ứng 3.3V TFT LCD 2.0" kèm bút cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 101.000 xuống còn ₫ 68.928, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
100% brand new and high quality
This is a 2.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult.
With GPRS module, you can design your Arduino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
Can use it directly to display characters, graphics and BMP format images.
Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V
Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo)
Specifications:
Material: Electrical components
Arduino library: UTFT
Driver IC: ILI9225,ILI9220,S6D1121,ST7775,ST7735, S6D1121
Touch screen type: resistive touchscreen
Touch Pen: length is 9cm
Resolution: 176x220, 16-bit (262,000) color
Display size: 2.0 inch
Operating voltage: 3.3V
Logic level: 3.3V
Operating current: the maximum is 150mA
LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day
Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Download ip:http://www.winddeal.net/image2/tools/1A0850.rar
Quantity: 1Pc
Note:
Pictures are for reference only, driver IC are random delivery, please refer to the product you received
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Module
1 x Touc
This is a 2.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult.
With GPRS module, you can design your Arduino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
Can use it directly to display characters, graphics and BMP format images.
Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V
Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo)
Specifications:
Material: Electrical components
Arduino library: UTFT
Driver IC: ILI9225,ILI9220,S6D1121,ST7775,ST7735, S6D1121
Touch screen type: resistive touchscreen
Touch Pen: length is 9cm
Resolution: 176x220, 16-bit (262,000) color
Display size: 2.0 inch
Operating voltage: 3.3V
Logic level: 3.3V
Operating current: the maximum is 150mA
LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day
Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
Download ip:http://www.winddeal.net/image2/tools/1A0850.rar
Quantity: 1Pc
Note:
Pictures are for reference only, driver IC are random delivery, please refer to the product you received
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Module
1 x Touc