Mô Đun Lập Trình Atmega8 Usb Avr Usbasp Cho Arduino

Features:
Features of the downloader



-Support at89s51/52 single chip microcomputer

-Support all ASP chips of AVR.

-The output port is ATMEL standard port.

-There are USB charging and target board supporting target voltage of 5V, which can be connected and selected by jumper cap.

-AUTOSPEED automatic speed regulation firmware, the downloader will automatically track the chip frequency to be programmed, automatically change the speed and achieve automatic speed regulation.

-Reserve MOSI, MISO, RET, SCK, VCC and GND. The 6PIN interface facilitates users to connect the target board according to their needs.



-PROGRAMMING interface is reserved. Users can upgrade the firmware of the downloader by themselves.



Programming software: AVR_fighter, PROGISP1.66 PROGISP1.67, compile PROGISP1.68 lower or higher will do, to burn the same piece of software, very convenient.

Specification:
I. module description:



-New original imported atmega8a-au chip on board



2, with power and write two indicators

-Self-recovery fuse for onboard 500mA overcurrent protection

-Support 5V and 3.3v power supply for target board



New and latest self - applicable automatic speed regulation.



Applicable to win8.1/8/7 /XP 32-bit / 64-bit, system computer.



This product can be directly connected with the computer USB port, the real USB downloader product, through which it connects to the target board, can download and program the single chip microcomputer easily, especially suitable for notebook computer and desktop computer, and download and debug through the USB port programming.

Product list:
1x USBasp USBISP 51 AVR microcontroller

Note:
-Due to the manual measurement and different measurement methods, the actual size could be slightly different.
-Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly diffe