Mô Đun Không Dây Kỹ Thuật Số Gt-24 Smd 2.4g Nrf24L01 + Pa + Lna
89.040
₫ 47.921
Sản phẩm Mô Đun Không Dây Kỹ Thuật Số Gt-24 Smd 2.4g Nrf24L01 + Pa + Lna đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 89.040 xuống còn ₫ 47.921, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The module uses the onboard PCB antenna by default. The chip inductor is soldered to 1, 2 as shown in the figure. If you need to use the ipx carrier to pull out the external antenna, you can put the chip inductor to 1,3 as shown.
Model: GT-24
Type：SMD chip
Module size: 30.3 × 14.5mm (including PCB antenna)
Working frequency b and: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)
Interface method: 1 * 8 * 1.27mm / 2 * 4 * 2.54mm (SMD can also be used with universal board and DuPont line)
Power supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)
Communication level: 0.7VCC ~ 3.3V (VCC refers to the module supply voltage)
Measuring distance: 1000 meters (clear space, maximum power, height 2 meters, air speed 250k)
Transmit power: 4 levels adjustable (maximum 20dBm, about 100mW at maximum power)
Airspeed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Shutdown current: approx. 30uA (test condition: CE = 0, power-down mode, VDD = 3.0V)
Transmitting current: about 90mA (power supply capacity must be greater than 250m)
Receive current: about 20mA
Antenna form: PCB antenna / ipex carrier antenna
Communication interface: SPI maximum speed up to 10Mbps
Send length: single packet 1 ~ 32 bytes 3 level FIFO
Receive length: single data packet 1 ~ 32 bytes 3-level FIFO
RSSI support: Not supported (only simple packet loss statistics are supported)
Receiving sensitivity: -94dBm @ 250kbp
Working temperature: -40 ~ + 85 ° C (industrial grade)
Storage temperature: -40 ~ + 125 ° C (industrial grade)
Feature:
-GT-24 module is an integrated data transmission module for 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial wireless transceiver.
-This module is equipped with a high-performance PCB antenna, precise impedance matching and nRF24L01P RF chip. Compared with nRF24L01, it has higher reliability, higher power level, longer transmission distance and lower power consumption.
-Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm, working in ISM b and 2.4GHz ~ 2.5GHz.
-The module has sufficient transmission power, good spectral characteristics, small harmonics, small channel crosstalk and ultra-small size. It is a model of all Murata's raw materials and industrial-grade standards.
-2.54mm standard plug-in interface and 1.27mm patch interface are standard spacing, which is convenient for users to use various circuits.
-The GT-24 module is also equipped with a built-in PCB antenna and an IPX carrier external antenna, which greatly enhances the module's freedom characteristics and provides users with the greatest degree of freedom.
Package:
1 x GT-24 Digital Wireless M
Model: GT-24
Type：SMD chip
Module size: 30.3 × 14.5mm (including PCB antenna)
Working frequency b and: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)
Interface method: 1 * 8 * 1.27mm / 2 * 4 * 2.54mm (SMD can also be used with universal board and DuPont line)
Power supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)
Communication level: 0.7VCC ~ 3.3V (VCC refers to the module supply voltage)
Measuring distance: 1000 meters (clear space, maximum power, height 2 meters, air speed 250k)
Transmit power: 4 levels adjustable (maximum 20dBm, about 100mW at maximum power)
Airspeed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Shutdown current: approx. 30uA (test condition: CE = 0, power-down mode, VDD = 3.0V)
Transmitting current: about 90mA (power supply capacity must be greater than 250m)
Receive current: about 20mA
Antenna form: PCB antenna / ipex carrier antenna
Communication interface: SPI maximum speed up to 10Mbps
Send length: single packet 1 ~ 32 bytes 3 level FIFO
Receive length: single data packet 1 ~ 32 bytes 3-level FIFO
RSSI support: Not supported (only simple packet loss statistics are supported)
Receiving sensitivity: -94dBm @ 250kbp
Working temperature: -40 ~ + 85 ° C (industrial grade)
Storage temperature: -40 ~ + 125 ° C (industrial grade)
Feature:
-GT-24 module is an integrated data transmission module for 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial wireless transceiver.
-This module is equipped with a high-performance PCB antenna, precise impedance matching and nRF24L01P RF chip. Compared with nRF24L01, it has higher reliability, higher power level, longer transmission distance and lower power consumption.
-Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm, working in ISM b and 2.4GHz ~ 2.5GHz.
-The module has sufficient transmission power, good spectral characteristics, small harmonics, small channel crosstalk and ultra-small size. It is a model of all Murata's raw materials and industrial-grade standards.
-2.54mm standard plug-in interface and 1.27mm patch interface are standard spacing, which is convenient for users to use various circuits.
-The GT-24 module is also equipped with a built-in PCB antenna and an IPX carrier external antenna, which greatly enhances the module's freedom characteristics and provides users with the greatest degree of freedom.
Package:
1 x GT-24 Digital Wireless M
Sản Phẩm Liên Quan
HOT