Mô Đun Kết Nối C-Light Glc-Lh-Smd 1.25gbps Lc Sfp Với Ddm
390.800
₫ 196.400
Sản phẩm Mô Đun Kết Nối C-Light Glc-Lh-Smd 1.25gbps Lc Sfp Với Ddm đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 390.800 xuống còn ₫ 196.400, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
【JH】C-light glc-lh-smd 1.25Gbps LC Connector Optic Module SFP Transceiver With DDM
Features:
The CLSFP13GELXDI /CLSFP13GELXD are small form factor pluggable (SFP) transceiver compatible with multi-sourcing agreement (MSA).
It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
C-light transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement, The transceiver consists of four sections: the LD driver, the limiting amplifier, the DFB laser and the PIN photo-detector.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.
Fit for CISCO for HUAWEI for H3C for Juniper for HP for D-Link for TP-Link
Descriptions:
Up to 1.25Gbps data links
20km with 9/125μm SMF
1310nm FP laser
Duplex LC Connector
Hot-pluggable SFP footprint
Single 3. 3V power supply
Operating temperature: Ref.to ordering info.
RoHS
Digital Diagnostic Monitor
Applications:
1.25Gbps 1000Base-LX
1G/2G Fiber Channel
Specifications:
Absolute Maximum Ratings:
Supply Voltage: -0.5~3.6V
Storage Temperature: -40~85°C
CLSFP13GELXDI: -40~85°C
CLSFP13GELXD: 0~70°C
Recommended Operating Conditions:
CLSFP13GELXDI: -40~85°C
CLSFP13GELXD: 0~70°C
Power Supply Voltage: 3.15~3.45V
Power Supply Current: 250 mA
Data Rate: 1.25~2.125Gbps
Max Link Length on 9/125μm SMF: 20 km
Optical Characteristics:
Transmitter:
Centre Wavelength: 1260~1360 nm
Spectral Width (RMS): 3nm
Average Output Power: -9~-3dBm
Extinction Ratio: 9dB
Optical Rise/Fall Time: 1ns
Receiver:
Centre Wavelength: 1200~1600nm
Receiver Sensitivity: -20dBm
Receiver Overload: 1dBm
LOS De-Assert: -25dBm
LOS Assert: -27dBm
LOS Hysteresis: 0.5~4.5dB
Package included:
1 x C-light SFP Transceiver
Notes:
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Please allow slight deviation due to manual measurement. Thank
Features:
The CLSFP13GELXDI /CLSFP13GELXD are small form factor pluggable (SFP) transceiver compatible with multi-sourcing agreement (MSA).
It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
C-light transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement, The transceiver consists of four sections: the LD driver, the limiting amplifier, the DFB laser and the PIN photo-detector.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.
Fit for CISCO for HUAWEI for H3C for Juniper for HP for D-Link for TP-Link
Descriptions:
Up to 1.25Gbps data links
20km with 9/125μm SMF
1310nm FP laser
Duplex LC Connector
Hot-pluggable SFP footprint
Single 3. 3V power supply
Operating temperature: Ref.to ordering info.
RoHS
Digital Diagnostic Monitor
Applications:
1.25Gbps 1000Base-LX
1G/2G Fiber Channel
Specifications:
Absolute Maximum Ratings:
Supply Voltage: -0.5~3.6V
Storage Temperature: -40~85°C
CLSFP13GELXDI: -40~85°C
CLSFP13GELXD: 0~70°C
Recommended Operating Conditions:
CLSFP13GELXDI: -40~85°C
CLSFP13GELXD: 0~70°C
Power Supply Voltage: 3.15~3.45V
Power Supply Current: 250 mA
Data Rate: 1.25~2.125Gbps
Max Link Length on 9/125μm SMF: 20 km
Optical Characteristics:
Transmitter:
Centre Wavelength: 1260~1360 nm
Spectral Width (RMS): 3nm
Average Output Power: -9~-3dBm
Extinction Ratio: 9dB
Optical Rise/Fall Time: 1ns
Receiver:
Centre Wavelength: 1200~1600nm
Receiver Sensitivity: -20dBm
Receiver Overload: 1dBm
LOS De-Assert: -25dBm
LOS Assert: -27dBm
LOS Hysteresis: 0.5~4.5dB
Package included:
1 x C-light SFP Transceiver
Notes:
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Please allow slight deviation due to manual measurement. Thank