Mô Đun Hiển Thị Màn Hình Lcd 0.96 Inch 6 Pin Oled Iic 128x64 I2C Ssd1306
85.035
₫ 60.300
Sản phẩm Mô Đun Hiển Thị Màn Hình Lcd 0.96 Inch 6 Pin Oled Iic 128x64 I2C Ssd1306 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 85.035 xuống còn ₫ 60.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Size: 0.96 inch
High resolution: 128*64
Color: white
Large viewing angle:> 160°
Support many platforms: Arduino. 51 series MSP430 series, STM32/2. CSR chip, etc.
Ultra-low power consumption: 0.04W during normal operation
Wide voltage support: 3..3V~5V DC
Working temperature: -30°C~80°C
Driver chip: SSD1306
Communication method: IIC, only 2 I/0 ports
No font library: use modulo software to fetch fonts
Backlight: OLED self-luminous, no backlight required
GND (power ground)
VCC (power supply positive 3.3~ 5V)
D0 (SPI clock line for SPI interface, IIC clock line for IC interface)
D1 (SPI data line for SPI interface, IIC data line for 1IC interface)
RES (OLED reset, OLED needs to be reset once after power-on)
DC (SPI data command selection pin, used to set IIC address when IC interface
CS (OLED SPI chip select, the bottom level is valid, if you don’t want to use it, it must be grounded)
Note:
OLED display is different from LCD; OLED is self-luminous; therefore, there is no backlight, and the screen will not have any response when only power is applied; the display must be correctly operated by the program. Please pay attention to
High resolution: 128*64
Color: white
Large viewing angle:> 160°
Support many platforms: Arduino. 51 series MSP430 series, STM32/2. CSR chip, etc.
Ultra-low power consumption: 0.04W during normal operation
Wide voltage support: 3..3V~5V DC
Working temperature: -30°C~80°C
Driver chip: SSD1306
Communication method: IIC, only 2 I/0 ports
No font library: use modulo software to fetch fonts
Backlight: OLED self-luminous, no backlight required
GND (power ground)
VCC (power supply positive 3.3~ 5V)
D0 (SPI clock line for SPI interface, IIC clock line for IC interface)
D1 (SPI data line for SPI interface, IIC data line for 1IC interface)
RES (OLED reset, OLED needs to be reset once after power-on)
DC (SPI data command selection pin, used to set IIC address when IC interface
CS (OLED SPI chip select, the bottom level is valid, if you don’t want to use it, it must be grounded)
Note:
OLED display is different from LCD; OLED is self-luminous; therefore, there is no backlight, and the screen will not have any response when only power is applied; the display must be correctly operated by the program. Please pay attention to
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000