Mô Đun Hạ Áp Lm2596S-Adj Dc-Dc 3a 5v/12v/24v
23.000
₫ 17.363
Sản phẩm Mô Đun Hạ Áp Lm2596S-Adj Dc-Dc 3a 5v/12v/24v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 23.000 xuống còn ₫ 17.363, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Descriptions:
1. LM2596 chip module uses high-quality , high efficiency (up to 92% ) , heat a small , can easily bring up 3A ( short ) over current, long working hours is recommended for use in less than 2.5A current , while adding fins (10W output above ) .
2. This module uses machine placement, reflow soldering, and each module before shipment after two hours of aging test, to ensure high reliability.
3. Input voltage range: DC 3.2V-40V (input voltage output voltage must be higher than 1.5V or more. Could not boost)
4. Output voltage range: 1.25V-35V DC voltage is continuously adjustable, high efficiency (up to 92%) the maximum output current of 3A.
Specifications:
Module property Non-isolation step-down (BUCK)
Rectification mode Non-synchronous rectification.
Input voltage 3.2V-40V
Output voltage 1.25V-35V
Input current 3A(maximum)
Switching frequency 65KHz
The output ripple 30mV(max.)
Conversion efficiency 92%( highest)
Load regulation ±0.5%
Voltage regulation ±2.5%
Work temperature -40℃ -- +85℃
Size 42*20*14(L*W*H)(mm)
Note:
1. Long working hours is recommended for use in less than 2.5A current, while adding a heat sink (10W output above); due buck module, in order to ensure stable output, keep a minimum 1.5V differential.
2. This module is adjustable buck module; the module can be adjusted above sinking blue adjustable resistor to change the output voltage. Input and output pressure is 2V; the minimum can be output 1.25V voltage.
3. Modules indicated above IN-( negative input ), IN + ( positive input ), OUT-( negative output ), OUT + ( positive output ) be sure to pick the correct , otherwise it may cause damage to the module .
4. This module has no output short circuit protection, output short circuit if prolonged, may result in damage to the module.
Included:
1 xRegulator Power M
1. LM2596 chip module uses high-quality , high efficiency (up to 92% ) , heat a small , can easily bring up 3A ( short ) over current, long working hours is recommended for use in less than 2.5A current , while adding fins (10W output above ) .
2. This module uses machine placement, reflow soldering, and each module before shipment after two hours of aging test, to ensure high reliability.
3. Input voltage range: DC 3.2V-40V (input voltage output voltage must be higher than 1.5V or more. Could not boost)
4. Output voltage range: 1.25V-35V DC voltage is continuously adjustable, high efficiency (up to 92%) the maximum output current of 3A.
Specifications:
Module property Non-isolation step-down (BUCK)
Rectification mode Non-synchronous rectification.
Input voltage 3.2V-40V
Output voltage 1.25V-35V
Input current 3A(maximum)
Switching frequency 65KHz
The output ripple 30mV(max.)
Conversion efficiency 92%( highest)
Load regulation ±0.5%
Voltage regulation ±2.5%
Work temperature -40℃ -- +85℃
Size 42*20*14(L*W*H)(mm)
Note:
1. Long working hours is recommended for use in less than 2.5A current, while adding a heat sink (10W output above); due buck module, in order to ensure stable output, keep a minimum 1.5V differential.
2. This module is adjustable buck module; the module can be adjusted above sinking blue adjustable resistor to change the output voltage. Input and output pressure is 2V; the minimum can be output 1.25V voltage.
3. Modules indicated above IN-( negative input ), IN + ( positive input ), OUT-( negative output ), OUT + ( positive output ) be sure to pick the correct , otherwise it may cause damage to the module .
4. This module has no output short circuit protection, output short circuit if prolonged, may result in damage to the module.
Included:
1 xRegulator Power M