Mô Đun Đọc Rfid Rc522 Arduino Chuyên Dụng
₫ 164.400
Sản phẩm Mô Đun Đọc Rfid Rc522 Arduino Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
.
Welcome to cv. Appropriate technology
1 rfid reader / writer + 1 rfid card + 1 rfid key chain module
This rfid reader / writer module is very practical for use in your electronic circuit, using the type a mifare 13.56 mhz technology (Iso / iec 14443) A / mifare mode released by nxp semiconductor with crypto-1-based security system (In the classic series) And triple-des / aes (In the desire series)
Product specs:
Mfrc522 contactless reader / writer ic chipset
Frequency: 13.56 mhz
Card reading distance: < 50mm
Access protocol: Spi (serial peripheral interface) @ 10 mbps
Rf transmission speed: 424 kbps (two-way / bi-directional) / 848 kbps (unidirectional)
Support mifare classic s50 / s70, ultralight, and desire cards
Framing & error detection (parity + crc) with 64 internal bytes i / o buffer
Power supply: 3.3 volt
Current consumption: 13-26 ma during reading / writing operations, < 80a during alert mode
Operational temperature: - 20c s.d. + 80c.
Dimension: 40x50 mm
Happy shopping...
Thank
Welcome to cv. Appropriate technology
1 rfid reader / writer + 1 rfid card + 1 rfid key chain module
This rfid reader / writer module is very practical for use in your electronic circuit, using the type a mifare 13.56 mhz technology (Iso / iec 14443) A / mifare mode released by nxp semiconductor with crypto-1-based security system (In the classic series) And triple-des / aes (In the desire series)
Product specs:
Mfrc522 contactless reader / writer ic chipset
Frequency: 13.56 mhz
Card reading distance: < 50mm
Access protocol: Spi (serial peripheral interface) @ 10 mbps
Rf transmission speed: 424 kbps (two-way / bi-directional) / 848 kbps (unidirectional)
Support mifare classic s50 / s70, ultralight, and desire cards
Framing & error detection (parity + crc) with 64 internal bytes i / o buffer
Power supply: 3.3 volt
Current consumption: 13-26 ma during reading / writing operations, < 80a during alert mode
Operational temperature: - 20c s.d. + 80c.
Dimension: 40x50 mm
Happy shopping...
Thank
Sản Phẩm Liên Quan
HOT