Mô Đun Kiểm Soát Tốc Độ Quạt CPU 12v 5A PWM PC
₫ 70.000
Sản phẩm Mô Đun Kiểm Soát Tốc Độ Quạt CPU 12v 5A PWM PC đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Characteristics:
Support to all fans within 12v 5a, synchronized rectifier output, efficiency
Even large currents do not require extra radiators Multiple fans can be used in parallel (Total current does not exceed 5a) To support automatic temperature control and manipulation speed control, temperature control speed setting with four temperature regions, easy to use in various applications
It can be monitored by three-line fans (Stall warning) Open it.
Specifications:
Working voltage: Dc12v
Circuit load capacity: Maximum current per circuit output 5a, bus current up to 9a
Output range:
20%-100% or 40%-100% (Tfl on)
Channel 2 and channel 10%-100%
(Note: The above range is applicable only to the pwm range, the actual control effect will vary according to the fan.)
Temperature probe parameters: 50k b 3950
Temperature zone error of thermostat: Error depends on the temperature probe, usually 3-5%
Minimum speed of stall alarm: 700-800 rpm
Description of functional settings switching:
Tfl (No. 1): Minimum temperature channel pwm settings, when fan1 pwm is on 40%, off1 pwm 20%.
Tp1 tp2 (No. 2, 3): Explanation of temperature control temperature region is as follows (Need to be used in conjunction with the temperature probe):
When temperature is below accelerated temperature, output at minimum speed When it exceeds the whole temperature, and always output at full speed.
Bf1 bf2 (No. 4, 5): Fan1 fan2, when the corresponding open channel fan fails, the controller will send out a sound and light alarm (With bees) When the fan is rotating back, the alarm will be automatically eliminated. If bf1 and bf2 are open (On) Fan 1, fan2 has one or two stops, the controller will issue alerts
Tp1 tp2 accelerated full temperature temperature
Off off 35° 45°
On off 40° 55°
Off on 50° 70°
On on 60° 90°
Packing:
1pcsx
1pcsx
Support to all fans within 12v 5a, synchronized rectifier output, efficiency
Even large currents do not require extra radiators Multiple fans can be used in parallel (Total current does not exceed 5a) To support automatic temperature control and manipulation speed control, temperature control speed setting with four temperature regions, easy to use in various applications
It can be monitored by three-line fans (Stall warning) Open it.
Specifications:
Working voltage: Dc12v
Circuit load capacity: Maximum current per circuit output 5a, bus current up to 9a
Output range:
20%-100% or 40%-100% (Tfl on)
Channel 2 and channel 10%-100%
(Note: The above range is applicable only to the pwm range, the actual control effect will vary according to the fan.)
Temperature probe parameters: 50k b 3950
Temperature zone error of thermostat: Error depends on the temperature probe, usually 3-5%
Minimum speed of stall alarm: 700-800 rpm
Description of functional settings switching:
Tfl (No. 1): Minimum temperature channel pwm settings, when fan1 pwm is on 40%, off1 pwm 20%.
Tp1 tp2 (No. 2, 3): Explanation of temperature control temperature region is as follows (Need to be used in conjunction with the temperature probe):
When temperature is below accelerated temperature, output at minimum speed When it exceeds the whole temperature, and always output at full speed.
Bf1 bf2 (No. 4, 5): Fan1 fan2, when the corresponding open channel fan fails, the controller will send out a sound and light alarm (With bees) When the fan is rotating back, the alarm will be automatically eliminated. If bf1 and bf2 are open (On) Fan 1, fan2 has one or two stops, the controller will issue alerts
Tp1 tp2 accelerated full temperature temperature
Off off 35° 45°
On off 40° 55°
Off on 50° 70°
On on 60° 90°
Packing:
1pcsx
1pcsx