Mô Đun Điều Khiển Nhiệt Độ Máy In 3d Mos Mos 30a Hỗ Trợ Dòng Điện Áp Cao Cho Tevo Blv Mgn
415.865
₫ 207.933
Sản phẩm Mô Đun Điều Khiển Nhiệt Độ Máy In 3d Mos Mos 30a Hỗ Trợ Dòng Điện Áp Cao Cho Tevo Blv Mgn đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 415.865 xuống còn ₫ 207.933, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
#3D #Printer #Parts #Heating #Controller #MOSFET #for #Heat #Bed/Extruder #MOS #Module #30A #Support #High #Current
3D Printer Parts Heating Controller MOSFET for Heat Bed/Extruder MOS Module 30A Support High Current For TEVO BLV MGN
Features: 100% brand new and high quality
This high power module is an add-on heated bed power expansion module for 3D printer.
Excellent performance MOS tube (nominal maximum current 280A).
It can be directly controlled by the hot bed output signal of Ramp1.4 and MKS series motherboards.
Made of high quality material, it is durable and long lasting use. Large heat sink, the maximum current can be up to 30A or more.
5-24v digital signal control can be used.
Specification: Item Type: MOSFET
Material: PCB-board +Aluminum
Color: Red
Size: Pls See the Pictures
Power Supply: 5V-24V
Usage: for TEVO 3D printer parts
Instructions:
1. Connect Power to the power supply, pay attention to the positive and negative.
2. Connect Hotbed to the heating line of the hot bed, pay attention to the positive and negative.
3. Direct digital control signal can be connected to Gnd and D8.
4. Connect the control signal output from Ramps1.4 or MKS motherboard MOS tube to -Bed+.
5. Two sets of control signals can only be connected to one set.
Package Includes: 1 x MOS Module
note: Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand.
Please allow 0-1cm error due to the manual measurm
3D Printer Parts Heating Controller MOSFET for Heat Bed/Extruder MOS Module 30A Support High Current For TEVO BLV MGN
Features: 100% brand new and high quality
This high power module is an add-on heated bed power expansion module for 3D printer.
Excellent performance MOS tube (nominal maximum current 280A).
It can be directly controlled by the hot bed output signal of Ramp1.4 and MKS series motherboards.
Made of high quality material, it is durable and long lasting use. Large heat sink, the maximum current can be up to 30A or more.
5-24v digital signal control can be used.
Specification: Item Type: MOSFET
Material: PCB-board +Aluminum
Color: Red
Size: Pls See the Pictures
Power Supply: 5V-24V
Usage: for TEVO 3D printer parts
Instructions:
1. Connect Power to the power supply, pay attention to the positive and negative.
2. Connect Hotbed to the heating line of the hot bed, pay attention to the positive and negative.
3. Direct digital control signal can be connected to Gnd and D8.
4. Connect the control signal output from Ramps1.4 or MKS motherboard MOS tube to -Bed+.
5. Two sets of control signals can only be connected to one set.
Package Includes: 1 x MOS Module
note: Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand.
Please allow 0-1cm error due to the manual measurm
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000