Mô-đun Điều Khiển Kích Hoạt Rơle 8 Kênh 5V/12V/24V Mức Cao Và Thấp Kèm Bộ Cách Ly Quang
178.478
₫ 97.000
Sản phẩm Mô-đun Điều Khiển Kích Hoạt Rơle 8 Kênh 5V/12V/24V Mức Cao Và Thấp Kèm Bộ Cách Ly Quang đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 178.478 xuống còn ₫ 97.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,22 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
8 channel relay module 5V/12V/24V high and low level trigger relay control with optocoupler for PLC automation equipment control
Each channel can be individually switched high and low level trigger
the module description:
1, the module uses genuine quality relay, normally open interfaces Maximum load: AC 250V / 10A, DC 30V / 10A;
2, using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
3, the working voltage: 5V,12V,24V
4, each channel relay can be set high or low-level triggered by jumper;
5, fault-tolerant design, even if the control line is broken, the relay will not operate;
6, the power indicator (green), 8 relay status indicator (red)
7, user-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient
8, module size: 141.5mm * 50mm * 18.5mm (L * W * H)
9 with four mounting bolts holes, hole 3.1mm, spacing 136mm * 44.5mm
module interface:
1, DC +: positive power supply (voltage relay according to requirements, 5V.9V.12V and 24V selection)
2, DC-: negative one
3, IN1-IN8: According to the settings for each channel, can be high or low level control of the corresponding relay
Relay output: 24 line interface, all interfaces can connect directly leads, user-friendly
1, NO1 - NO8: normally open relay interfaces, relay before hanging, pull back with COM
2, COM1 - COM8: Relay Common Interface
3, NC1 - NC8: normally closed relay interfaces, relay before with COM, pull vacant post
High and low end of the trigger selection:
1.S1-S8 relay 1 followed by road -8 path of high and low trigger selection;
2, com and low short, trigger the corresponding relay is low, and high when com shorted high level trigger
Before purchase:
1. All the goods are in stock and we will dispatch immediately if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.Use the vouchers for more saving.
Shipment：
1.1-2 days to ship(except for the pro-order item)
After purchase:
1.If you are satisfied，please give us 5 stars praise.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
if you receive a defect item,please contact us at once with item picture or video
#8 channel #relay #module #5V #12V #24V #high #and low #level #trigger #relay #control #with #optocoupler #for #PLC #automation #equipment #co
Each channel can be individually switched high and low level trigger
the module description:
1, the module uses genuine quality relay, normally open interfaces Maximum load: AC 250V / 10A, DC 30V / 10A;
2, using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
3, the working voltage: 5V,12V,24V
4, each channel relay can be set high or low-level triggered by jumper;
5, fault-tolerant design, even if the control line is broken, the relay will not operate;
6, the power indicator (green), 8 relay status indicator (red)
7, user-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient
8, module size: 141.5mm * 50mm * 18.5mm (L * W * H)
9 with four mounting bolts holes, hole 3.1mm, spacing 136mm * 44.5mm
module interface:
1, DC +: positive power supply (voltage relay according to requirements, 5V.9V.12V and 24V selection)
2, DC-: negative one
3, IN1-IN8: According to the settings for each channel, can be high or low level control of the corresponding relay
Relay output: 24 line interface, all interfaces can connect directly leads, user-friendly
1, NO1 - NO8: normally open relay interfaces, relay before hanging, pull back with COM
2, COM1 - COM8: Relay Common Interface
3, NC1 - NC8: normally closed relay interfaces, relay before with COM, pull vacant post
High and low end of the trigger selection:
1.S1-S8 relay 1 followed by road -8 path of high and low trigger selection;
2, com and low short, trigger the corresponding relay is low, and high when com shorted high level trigger
Before purchase:
1. All the goods are in stock and we will dispatch immediately if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.Use the vouchers for more saving.
Shipment：
1.1-2 days to ship(except for the pro-order item)
After purchase:
1.If you are satisfied，please give us 5 stars praise.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
if you receive a defect item,please contact us at once with item picture or video
#8 channel #relay #module #5V #12V #24V #high #and low #level #trigger #relay #control #with #optocoupler #for #PLC #automation #equipment #co
Sản Phẩm Liên Quan
HOT
HOT