Mô Đun Điều Khiển Động Cơ Servo Pca9685 16 Kênh 12 Bit Pwm
₫ 118.000
Sản phẩm Mô Đun Điều Khiển Động Cơ Servo Pca9685 16 Kênh 12 Bit Pwm đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Pca9685 16 channel 12 bit pwm servo controller module is an io expander module devoted to controlling up to a maximum of 16pcs servos motor (16 channels) Only with i2c connections.
The accuracy / resolution level of the controller reached 12bit a.k.a. 4096 programmable steps with pwm output (Duty cycle 0 s / d 100%) And the working frequency is supported by 24hz s / d 1526hz.
Visit tokoduino
It 's very suitable for robotics applications or something like that on your arduino or your minsys., It requires control of many servos by using only a few io.
You can put this module together into 2 or more, produce more servo motors that you can control.
Specs:
- io expander chip: Nxp pca9685pw
- 16 channel rivers. Each output programmable.
- 1mhz fast-mode plus compatible i2c-bus interface with 30 ma high drive capacity on sda output for driving high capacitive busses
- 4096-step (12-bit) linear programmable pwm output.
- operating voltage: 2.3v 5.5v.
- dimensions (no heads or terminal block) 2.5x1 x 0.1 (62.5mm x 25.4mm x 3mm)
- i2c 7-bit address range between 0x40 - 0x7f, selectable with jumpers
- external 50 mhz (max.) clock input
- visit tokoduino
- internal power-on reset
- noise filter on sda / scl input
- edge rate control on output.
- no output glitches on power-up
Completeness:
1pcs pca9685 module.
For tutorial / sample code etc. There is quite a lot available online, leaving digoogling alone: D
Please wrap gan / sist, only in tokod
The accuracy / resolution level of the controller reached 12bit a.k.a. 4096 programmable steps with pwm output (Duty cycle 0 s / d 100%) And the working frequency is supported by 24hz s / d 1526hz.
Visit tokoduino
It 's very suitable for robotics applications or something like that on your arduino or your minsys., It requires control of many servos by using only a few io.
You can put this module together into 2 or more, produce more servo motors that you can control.
Specs:
- io expander chip: Nxp pca9685pw
- 16 channel rivers. Each output programmable.
- 1mhz fast-mode plus compatible i2c-bus interface with 30 ma high drive capacity on sda output for driving high capacitive busses
- 4096-step (12-bit) linear programmable pwm output.
- operating voltage: 2.3v 5.5v.
- dimensions (no heads or terminal block) 2.5x1 x 0.1 (62.5mm x 25.4mm x 3mm)
- i2c 7-bit address range between 0x40 - 0x7f, selectable with jumpers
- external 50 mhz (max.) clock input
- visit tokoduino
- internal power-on reset
- noise filter on sda / scl input
- edge rate control on output.
- no output glitches on power-up
Completeness:
1pcs pca9685 module.
For tutorial / sample code etc. There is quite a lot available online, leaving digoogling alone: D
Please wrap gan / sist, only in tokod