Mô Đun Điều Khiển Động Cơ Servo Mg995 Sg90
₫ 77.600
Sản phẩm Mô Đun Điều Khiển Động Cơ Servo Mg995 Sg90 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Motor Drive Module Serial Port Control Controller Debugger MG995 SG90 Dual Servos Knobs Control Module
Features:
The onboard mature 8-bit MCU is used to generate high-resolution PWM signals with precise control.
Support manual mode and return mode, switch by button, with mode indicator;
Support knob adjustment or serial command control in manual mode;
The serial port command control can use the matching host computer or connect to the external MCU;
Number of control channels: 2 channels (M0 and M1 servos). When using the knob adjustment and return function, the 2 servos are controlled at the same time. When using the serial command, the 2 servos can be controlled separately.
Steering gear control accuracy: 0.09 degrees (that is, PWM minimum change value of 1us)
Support steering gear with a control period of 20ms and a pulse width of 0.5-2.5ms (such as Futaba, Huisheng, etc.)
Can directly use 2S lithium battery charging head to debug and return to the steering gear
Power supply voltage range: 5-9V (specifically based on the actual servo supply voltage)
VCC, GND: power interface;
XH2.54mm carrier: backup power interface, can be connected to 2S lithium battery;
2X3P pin header: 2-way servo interface;
TX, RX: UART serial port pins;
SWIM, NRST: Reserve the MCU program download
Features:
The onboard mature 8-bit MCU is used to generate high-resolution PWM signals with precise control.
Support manual mode and return mode, switch by button, with mode indicator;
Support knob adjustment or serial command control in manual mode;
The serial port command control can use the matching host computer or connect to the external MCU;
Number of control channels: 2 channels (M0 and M1 servos). When using the knob adjustment and return function, the 2 servos are controlled at the same time. When using the serial command, the 2 servos can be controlled separately.
Steering gear control accuracy: 0.09 degrees (that is, PWM minimum change value of 1us)
Support steering gear with a control period of 20ms and a pulse width of 0.5-2.5ms (such as Futaba, Huisheng, etc.)
Can directly use 2S lithium battery charging head to debug and return to the steering gear
Power supply voltage range: 5-9V (specifically based on the actual servo supply voltage)
VCC, GND: power interface;
XH2.54mm carrier: backup power interface, can be connected to 2S lithium battery;
2X3P pin header: 2-way servo interface;
TX, RX: UART serial port pins;
SWIM, NRST: Reserve the MCU program download
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000