Mô Đun Điều Khiển Động Cơ 22a Irf5305s Pwm Dc Cho Arduino
₫ 119.300
Sản phẩm Mô Đun Điều Khiển Động Cơ 22a Irf5305s Pwm Dc Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Sku: B001
This module has the optocoupler in it, so you can control this module only with low voltage. (3v sd 12v) From io arduino or similar microcontroller, the controller device will be protected optoisolatorally.
This module is suitable for use as a switching circuit or driver replacement relay or transistor, Because mosfet is famous for its switching speed. (Fast repsonse time.) And its power efficiency is compared to mechanical relay or transistor. This driver can also be used as a control for led light brightness or motor speed.
Note:
- this device can 't be used reversing the motor turn because it only sets the duty cycle (pwm) or on off
- other motor control modules can be seen in hwthinker 's storefront.
Example application:
- led driver / dimmer or dc light, dc motor, fan
- driver for pwm motor
- and so on.
Specs:
Input control voltage: 3.3v - 12v
Output charged voltage: 5-36v
Use of optoisolated board, completely separated from the 2-minal voltage.
Input is controlled by a 2 pin control, a ground control can be directly connected to the control switch.
Control current 1-5ma.
Maximum current: 22a, (add cooler heatsinks if the current is over 5a)
Board with led light indicator.
Host input and output screw terminal block
Control terminal using 2.54mm pin, easy wiring.
Can be directly controller by microcontroller io, arduino, etc
Board size: 4.2x
This module has the optocoupler in it, so you can control this module only with low voltage. (3v sd 12v) From io arduino or similar microcontroller, the controller device will be protected optoisolatorally.
This module is suitable for use as a switching circuit or driver replacement relay or transistor, Because mosfet is famous for its switching speed. (Fast repsonse time.) And its power efficiency is compared to mechanical relay or transistor. This driver can also be used as a control for led light brightness or motor speed.
Note:
- this device can 't be used reversing the motor turn because it only sets the duty cycle (pwm) or on off
- other motor control modules can be seen in hwthinker 's storefront.
Example application:
- led driver / dimmer or dc light, dc motor, fan
- driver for pwm motor
- and so on.
Specs:
Input control voltage: 3.3v - 12v
Output charged voltage: 5-36v
Use of optoisolated board, completely separated from the 2-minal voltage.
Input is controlled by a 2 pin control, a ground control can be directly connected to the control switch.
Control current 1-5ma.
Maximum current: 22a, (add cooler heatsinks if the current is over 5a)
Board with led light indicator.
Host input and output screw terminal block
Control terminal using 2.54mm pin, easy wiring.
Can be directly controller by microcontroller io, arduino, etc
Board size: 4.2x
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000