Mô Đun Điều Chỉnh Độ Sáng Đèn Led Điện Tử Thông Minh
17.969
₫ 11.321
Sản phẩm Mô Đun Điều Chỉnh Độ Sáng Đèn Led Điện Tử Thông Minh đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 17.969 xuống còn ₫ 11.321, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Smart Electronics Capacitive Touch Dimmer Constant Pressure Stepless Dimming PWM Control Panel Type LED Dimmer Switch Module
The lamp brightness can be adjusted by requirement,it is very to operate.
It can touch in medium protection,such glass,acrylic,plastic,ceramics and so on,which is very safe.
Wide application of voltage range,you can choose arbitrarily between 2.4V to 4.5V.
Simple applied circuit,less peripheral devices, easy processing, low cost.
Anti power and phone interference,the EFT can reach above +/-2KV;the touch response sensitivity and reliability will not affected by the close distance or multi-angle mobile phone interference.
Install:Needn't to touch copper foil directly,the dimming can be processed across acrylic glass(above 3mm) or plastic.
Application:It can control LED module,light and so on.It is available for indoor LED,lighting lamp,DIY automotive lights dimming refit.
Function:Single touch,using the principle of capacitance touch .The default function is switch,dimming,with brightness memories LED touch dimming.It will light slowly when turn on the lights,and become dark slowly when turn off,which effectively avoid the stimulation to eyes.
Dimming mode:Non-polar PWM dimming.
Wiring method:PCB board(VCC,GND) is power input,(LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area, also can wire to lead out (the wiring should not be too long), copper skin area should be 2x3cm.With copper foil copper foil board module will side to the shell side.
Package includes:
1Pc xCapacitive Touch LED Dimmer PWM Control Switch Module
#Smart #Electronics #Capacitive #Touch #Dimmer #Constant #Pressure #Stepless #Dimming #PWM #Control #Panel #Type #LED #Dimmer #Switch #M
The lamp brightness can be adjusted by requirement,it is very to operate.
It can touch in medium protection,such glass,acrylic,plastic,ceramics and so on,which is very safe.
Wide application of voltage range,you can choose arbitrarily between 2.4V to 4.5V.
Simple applied circuit,less peripheral devices, easy processing, low cost.
Anti power and phone interference,the EFT can reach above +/-2KV;the touch response sensitivity and reliability will not affected by the close distance or multi-angle mobile phone interference.
Install:Needn't to touch copper foil directly,the dimming can be processed across acrylic glass(above 3mm) or plastic.
Application:It can control LED module,light and so on.It is available for indoor LED,lighting lamp,DIY automotive lights dimming refit.
Function:Single touch,using the principle of capacitance touch .The default function is switch,dimming,with brightness memories LED touch dimming.It will light slowly when turn on the lights,and become dark slowly when turn off,which effectively avoid the stimulation to eyes.
Dimming mode:Non-polar PWM dimming.
Wiring method:PCB board(VCC,GND) is power input,(LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area, also can wire to lead out (the wiring should not be too long), copper skin area should be 2x3cm.With copper foil copper foil board module will side to the shell side.
Package includes:
1Pc xCapacitive Touch LED Dimmer PWM Control Switch Module
#Smart #Electronics #Capacitive #Touch #Dimmer #Constant #Pressure #Stepless #Dimming #PWM #Control #Panel #Type #LED #Dimmer #Switch #M