Mô Đun Đa Năng Cjmcu Ft232H Usb Sang Jtag Uart / Fifo Spi / I2C
₫ 163.300
Sản phẩm Mô Đun Đa Năng Cjmcu Ft232H Usb Sang Jtag Uart / Fifo Spi / I2C đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
CJMCU FT232H Multifunction High-Speed USB to JTAG UART/ FIFO SPI/ I2C Module
Description:
Features:
Typical Applications
? Single chip USB to UART (RS232, RS422 or RS485)
? USB to FIFO
? USB to FT1248
? USB to JTAG
? USB to SPI
? USB to I2C
? USB to Bit-Bang
? USB to Fast Serial Interface
? USB to CPU target interface (as memory)
CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:
? Single channel USB to serial / parallel ports with a variety of configurations.
? Entire USB protocol handled on the chip. No USB specific firmware programming required.
? USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
? Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
? UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
? USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
? USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
? Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
? CPU-style FIFO interface mode simplifies CPU interface design.
? Fast serial interface option.
? FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
? Adjustable receive buffer tim
Description:
Features:
Typical Applications
? Single chip USB to UART (RS232, RS422 or RS485)
? USB to FIFO
? USB to FT1248
? USB to JTAG
? USB to SPI
? USB to I2C
? USB to Bit-Bang
? USB to Fast Serial Interface
? USB to CPU target interface (as memory)
CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:
? Single channel USB to serial / parallel ports with a variety of configurations.
? Entire USB protocol handled on the chip. No USB specific firmware programming required.
? USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
? Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
? UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
? USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
? USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
? Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
? CPU-style FIFO interface mode simplifies CPU interface design.
? Fast serial interface option.
? FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
? Adjustable receive buffer tim
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000