Mô Đun Cung Cấp Nguồn Điện Dc Dc Chuyên Dụng

Positive&Negative Dual DC DC Boost Converter ADC DAC LCD Power Supply Welding
Features:
-DC DC boost converter module working frequency 400kHz.
2.2.54mm pin pitch, for MCU development board breadboard friendly.
-High efficiency up to 90%.
-The module can output positive and negative voltages.
-Built in frequency compensation, built in soft-start function, built in thermal shutdown function, built in current limit function.


Descriptions:
-Small size and light weight, it is convenient to use.
-It can be widely used as power supply for for ADC, DAC, LCD, etc.


Specifications:
Product Name: DC DC Boost Converter Module
Model Number: DD1718PA
Type: ±5V/±6V/±9V/±12V/±15V/±24V (Optional)
Material: Metal
Color: Multicolor
Size: 25x16.3x6.6mm/0.98x0.64x0.26in
Weight(with Pin): 3.4g/0.12oz
Weight(without Pin): 3g/0.11oz
Quiescent Current: 3-4mA
Operating Temperature Range : -40~+125°C
Storage Temperature Range : -65~+150°C
±5V:
Input Voltage: DC3 ~ 4.5V, Output: DC ±5V(Deviation is ±5%)
Maximum Input Current: 2A
Maximum Output Current: +Vo is 1 A,-Vo is 200mA
±6V:
Input Voltage: DC3 ~ 5V, Output: DC ±6V(Deviation is ±5%)
Maximum Input Current: 2A
Maximum Output Current: +Vo is 1A,-Vo is 200mA
±9V:
Input Voltage: DC3.3~ 8V, Output: DC±9(Deviation is ±4%)
Maximum Input Current: 1.8A
Maximum Output Current: +Vo is 800mA,-Vo is 180mA
±12V:
Input Voltage: DC3.3~ 11V, Output: DC±12(Deviation is ±4%)
Maximum Input Current: 1.8A
Maximum Output Current: +Vo is 700mA, -Vo is 150mA
±15V:
Input Voltage: DC3.3~ 13V, Output: DC±15(Deviation is ±4%)
Maximum Input Current: 1.8A
Maximum Output Current: +Vo is 600mA, -Vo is 120mA
±24V:
Input Voltage: DC3.6~ 18V, Output: DC ±24(Deviation is ±4%)
Maximum Input Current: 1.8A
Maximum Output Current: +Vo is 400mA, -Vo is 100mA

Package Informations:
Package Size: 40x60x20mm/1.57x2.36x0.79in
Package Weight: 20g/0.71oz
Polybag Package


Package Included:
1 x DC DC Boost Converter Module


Notes:
-Due to the diode partial pressure, the voltage of -Vo is lower than +Vo.
-In order to obtain a more stable voltage, it is recommended that the output is greater than 15MA.
3.-Vo cannot be used alone, or no voltage output.But you can just use