Mô Đun Công Tắc Cảm Ứng Chạm Đa Năng 0129 3v-30v 12v
₫ 24.000
Sản phẩm Mô Đun Công Tắc Cảm Ứng Chạm Đa Năng 0129 3v-30v 12v đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store Threegoodstonesgen.Wish you have a good shopping.
The touch module presents a 30-cm long 4Pin wire. The plug of the wire is 2.54mm pitch, which is very convenient for customer applications.
The touch sensor switch module and the back of the circuit board are touch-sensitive surfaces, and the double-sided adhesive of acrylic material is presented, which is very convenient for pasting on the surface of glass, plastic, rubber, acrylic, ceramics and other media. Sensing sensitivity is very high Maximum sensing distance up to 8mm, working voltage support 3V-30V range, working current up to 2A. Suitable for LED light control, support for external relays, power switch, low dropout design, output voltage = input voltage.
Board size: round diameter 2 cm.
The front of the circuit board is an electronic component, and the back side is the touch surface with a maximum sensing distance of 8mm
Operating voltage: DC 3V-30V, ultra-low standby current within 5V or less 2A, operating current: 0-2A.
Operating Mode: Support Latching/Jogging (The default state is latching when shipped, press once to switch on/standby after pressing ON again).
Power-on state: Supports power-on/standby (the default state is the power-off state when shipped);Power input: IN+, IN- on the board;
Load Output: OUT+ OUT- on the Board;Power-on state: output voltage = supply voltage, standby voltage output voltage = 0v;
Boot status: led light on. Standby state: LED light off;
Package Included:1 x M
The touch module presents a 30-cm long 4Pin wire. The plug of the wire is 2.54mm pitch, which is very convenient for customer applications.
The touch sensor switch module and the back of the circuit board are touch-sensitive surfaces, and the double-sided adhesive of acrylic material is presented, which is very convenient for pasting on the surface of glass, plastic, rubber, acrylic, ceramics and other media. Sensing sensitivity is very high Maximum sensing distance up to 8mm, working voltage support 3V-30V range, working current up to 2A. Suitable for LED light control, support for external relays, power switch, low dropout design, output voltage = input voltage.
Board size: round diameter 2 cm.
The front of the circuit board is an electronic component, and the back side is the touch surface with a maximum sensing distance of 8mm
Operating voltage: DC 3V-30V, ultra-low standby current within 5V or less 2A, operating current: 0-2A.
Operating Mode: Support Latching/Jogging (The default state is latching when shipped, press once to switch on/standby after pressing ON again).
Power-on state: Supports power-on/standby (the default state is the power-off state when shipped);Power input: IN+, IN- on the board;
Load Output: OUT+ OUT- on the Board;Power-on state: output voltage = supply voltage, standby voltage output voltage = 0v;
Boot status: led light on. Standby state: LED light off;
Package Included:1 x M
Sản Phẩm Liên Quan
HOT