Mô Đun Cảm Biến Mưa Chuyên Dụng Chất Lượng Cao
₫ 74.100
Sản phẩm Mô Đun Cảm Biến Mưa Chuyên Dụng Chất Lượng Cao đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Snow raindrops detection sensor module rain weather module humidity for arduino
Speciation:
Working voltage: 3.3v ~ 5v;
Wire:
1. Vcc: Connect to positive power supply (3~5v);
2. Gnd: Connect to negative power supply;
3. Do: Ttl switching signal output;
4. An analog output:
Application:
Arduino robot kits, rain, rain sensor, can be used to monitor a variety of weather conditions, and turned into several fixed output signal and ao
Features:
1. The sensor uses a high-quality double-sided fr-04 materials, the large area of 5.0x4.0cm, and nickel-plated surface, effective against oxide, conductivity, superior performance and lifetime areas;
2. The comparator output signal clean waveform is good, driving excellence, than 15ma;
3. Power bits adjust the sensitivity;
4. Working voltage: 3.3~5v;
5. The output format: Digital switching output (0 and 1) and analog voltage output ao;
6. With bolt holes for easy installlation;
7. A small board pcb size: 3.2cm x 1.4cm;
8. Using a wide voltage lm393 comparator;
9. Connect the 5v power supply, power indicator light, sensor board does not drop, do output is high;
10. The switch lights off, dripping a drop of water, do output is low, the switch indicator light;
11. Brush above water droplets, has returned to the output high state;
12. Ao analog output can be connected to the microcontroller detects ad mouth drops of rain in the above size;
Sku: 880000030
#Rainsensensormodule #Rain censor #Watersensor #Arduino #Sens
Speciation:
Working voltage: 3.3v ~ 5v;
Wire:
1. Vcc: Connect to positive power supply (3~5v);
2. Gnd: Connect to negative power supply;
3. Do: Ttl switching signal output;
4. An analog output:
Application:
Arduino robot kits, rain, rain sensor, can be used to monitor a variety of weather conditions, and turned into several fixed output signal and ao
Features:
1. The sensor uses a high-quality double-sided fr-04 materials, the large area of 5.0x4.0cm, and nickel-plated surface, effective against oxide, conductivity, superior performance and lifetime areas;
2. The comparator output signal clean waveform is good, driving excellence, than 15ma;
3. Power bits adjust the sensitivity;
4. Working voltage: 3.3~5v;
5. The output format: Digital switching output (0 and 1) and analog voltage output ao;
6. With bolt holes for easy installlation;
7. A small board pcb size: 3.2cm x 1.4cm;
8. Using a wide voltage lm393 comparator;
9. Connect the 5v power supply, power indicator light, sensor board does not drop, do output is high;
10. The switch lights off, dripping a drop of water, do output is low, the switch indicator light;
11. Brush above water droplets, has returned to the output high state;
12. Ao analog output can be connected to the microcontroller detects ad mouth drops of rain in the above size;
Sku: 880000030
#Rainsensensormodule #Rain censor #Watersensor #Arduino #Sens
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000