Mô Đun Cảm Biến Chuyển Động Sw 420 Cho Arduino 3.3-5v
18.426
₫ 16.673
Sản phẩm Mô Đun Cảm Biến Chuyển Động Sw 420 Cho Arduino 3.3-5v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 18.426 xuống còn ₫ 16.673, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Purpose:
Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module
Module features:
1, the company produced normally closed type vibration sensor SW-420,.
2, the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma
3, the working voltage of 3.3V to 5V
4, output form: digital switch output (0 and 1)
5, has a fixed bolt hole, convenient installation
6, small board PCB size: 3.2cm x 1.4cm
7, use the LM393 wide voltage comparator
Module directions for use:
1, product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit;
2, product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright;
3, output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police
Package:
1 x SW-420 Motion Sensor Module Vibration Switch Alarm Sensor Module for Ar
Purpose:
Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module
Module features:
1, the company produced normally closed type vibration sensor SW-420,.
2, the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma
3, the working voltage of 3.3V to 5V
4, output form: digital switch output (0 and 1)
5, has a fixed bolt hole, convenient installation
6, small board PCB size: 3.2cm x 1.4cm
7, use the LM393 wide voltage comparator
Module directions for use:
1, product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit;
2, product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright;
3, output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police
Package:
1 x SW-420 Motion Sensor Module Vibration Switch Alarm Sensor Module for Ar