Mô Đun Cảm Biến Chuyển Động 12v Chuyên Dụng
₫ 65.900
Sản phẩm Mô Đun Cảm Biến Chuyển Động 12v Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Module features:
-It can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.
2, the detection angle is about 60 degrees, especially sensitive to the flame spectrum
3, the sensitivity is adjustable (blue digital potentiometer adjustment in the figure)
4, the comparator output directly triggers the relay
5, the external dimensions are: 50x26mm, thickness 19mm, with fixed bolt holes for easy installation
6, the output has a blue terminal block, convenient wiring
Electrical parameters:
Supply voltage: 12VDC
Current: greater than 150mA
Load: 250V 10A AC or 30V 10A DC
Module instructions:
-The flame sensor is most sensitive to the flame and also responds to the sunlight. It is generally used for fire alarms and other purposes.
-By adjusting the potentiometer, the intensity of the sensor's induced flame can be set. When the flame exceeds the set threshold, the relay pulls in, the common end is connected to the normally open end, and when the flame is lower than the set threshold, the relay is disconnected. The common end is connected to the normally closed end;
3, the common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is energized, the common end is open to the normally open end, when there is no electricity, the common end and the normally closed end are turned on;
-The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
Flame sensor plus relay mod
-It can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.
2, the detection angle is about 60 degrees, especially sensitive to the flame spectrum
3, the sensitivity is adjustable (blue digital potentiometer adjustment in the figure)
4, the comparator output directly triggers the relay
5, the external dimensions are: 50x26mm, thickness 19mm, with fixed bolt holes for easy installation
6, the output has a blue terminal block, convenient wiring
Electrical parameters:
Supply voltage: 12VDC
Current: greater than 150mA
Load: 250V 10A AC or 30V 10A DC
Module instructions:
-The flame sensor is most sensitive to the flame and also responds to the sunlight. It is generally used for fire alarms and other purposes.
-By adjusting the potentiometer, the intensity of the sensor's induced flame can be set. When the flame exceeds the set threshold, the relay pulls in, the common end is connected to the normally open end, and when the flame is lower than the set threshold, the relay is disconnected. The common end is connected to the normally closed end;
3, the common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is energized, the common end is open to the normally open end, when there is no electricity, the common end and the normally closed end are turned on;
-The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
Flame sensor plus relay mod
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000