Mô-đun Cảm Biến Ánh Sáng Quang Học Arduino
₫ 42.400
Sản phẩm Mô-đun Cảm Biến Ánh Sáng Quang Học Arduino đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Light sensor module is a module with light sensor (Idr) That can detect the intensity of light, It is well suited to be connected to arduino or other minsys for the purposes of sensor / auto switch / robotics and project2 other attractions.
The function of this sensor module is to detect the presence of light / measure the intensity of light, And the results were reported in the port out section.
Product explanation:
- can detect brightness and intensity of light around
- adjustable sensitivity (with potentiometer)
- work voltage 3.3v - 5v
- digital output 0 and 1
- with screw holes for installlation.
- 3cm x 1.6cm
- with power indicator (red) and detection indicator (green)
- using the lm393 comparator stable
Specs:
Uses photosensitive resistance sensor
Uses lm393 wide voltage comparator
Clean signal, good waveform strong driving ability for more than 15 ma
With adjustable potentiometer to adjustable light sensitivity
Has single mounting hole
Visit tokoduino dot com
3.2cm x 1.4cm small pcb board
Operating voltage of 3.3 v to 5 v tduino
Digital output type (0 and 1)
Low output: When light intensity is higher than set point
Output high: When light intensity is lower than set point
Interface:
- vcc external voltage 3.3v-5v
- gnd ground.
- digital output (0 and 1)
Instructions:
- photoresistor module is sensitive to intensity and brightness light around
- when the intensity of light is less than the already determined value, do (digital output) produces a high value. And instead when the intensity of light exceeds the predetermined value, do produces a low value.
- do port can be directly connected to microcontroller to detect high and low values, So it can recognize changes in the intensity of light.
- the do port can be connected directly to the relay and serves as a light switch.
Completeness:
1pcs light sensor m
The function of this sensor module is to detect the presence of light / measure the intensity of light, And the results were reported in the port out section.
Product explanation:
- can detect brightness and intensity of light around
- adjustable sensitivity (with potentiometer)
- work voltage 3.3v - 5v
- digital output 0 and 1
- with screw holes for installlation.
- 3cm x 1.6cm
- with power indicator (red) and detection indicator (green)
- using the lm393 comparator stable
Specs:
Uses photosensitive resistance sensor
Uses lm393 wide voltage comparator
Clean signal, good waveform strong driving ability for more than 15 ma
With adjustable potentiometer to adjustable light sensitivity
Has single mounting hole
Visit tokoduino dot com
3.2cm x 1.4cm small pcb board
Operating voltage of 3.3 v to 5 v tduino
Digital output type (0 and 1)
Low output: When light intensity is higher than set point
Output high: When light intensity is lower than set point
Interface:
- vcc external voltage 3.3v-5v
- gnd ground.
- digital output (0 and 1)
Instructions:
- photoresistor module is sensitive to intensity and brightness light around
- when the intensity of light is less than the already determined value, do (digital output) produces a high value. And instead when the intensity of light exceeds the predetermined value, do produces a low value.
- do port can be directly connected to microcontroller to detect high and low values, So it can recognize changes in the intensity of light.
- the do port can be connected directly to the relay and serves as a light switch.
Completeness:
1pcs light sensor m
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000