Mô đun cảm biến ánh sáng cho Arduino STM32 Raspberry Pi
42.600
₫ 30.000
Sản phẩm Mô đun cảm biến ánh sáng cho Arduino STM32 Raspberry Pi đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 42.600 xuống còn ₫ 30.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Module features:
1, the sensitive type photosensitive resistance sensor
2, the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3, with adjustable potentiometer can detect light brightness adjustment
4, the working voltage of 3.3V to 5V
5, the output form: DO digital switch output (0 and 1) and AO analog voltage output
6, has a fixed bolt hole, convenient installation
7, small board PCB size: 3.2cm x 1.4cm
8, using the LM393 wide voltage comparator
Module instructions
1, the photosensitive resistance module's most sensitive to ambient light, generally used to detect the environment around the brightness of the light, or MCU trigger relay module, etc.;
2, module in the environment light intensity short of setting threshold, output high level DO end, when the environment light intensity more than set threshold, output DO low level;
3, the DO output can be attached directly to the single chip microcomputer, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change;
4, the DO output can be directly driven our relay module, which can form a light-operated switch.
5, small plate analog output AO and AD module, through the AD conversion, can obtain more accurate values of environmental light;
Product connection details:
1, VCC power supply positive
2, GND connect power cathode
3, DO TTL switch signal output
4, AO analog signal o
1, the sensitive type photosensitive resistance sensor
2, the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3, with adjustable potentiometer can detect light brightness adjustment
4, the working voltage of 3.3V to 5V
5, the output form: DO digital switch output (0 and 1) and AO analog voltage output
6, has a fixed bolt hole, convenient installation
7, small board PCB size: 3.2cm x 1.4cm
8, using the LM393 wide voltage comparator
Module instructions
1, the photosensitive resistance module's most sensitive to ambient light, generally used to detect the environment around the brightness of the light, or MCU trigger relay module, etc.;
2, module in the environment light intensity short of setting threshold, output high level DO end, when the environment light intensity more than set threshold, output DO low level;
3, the DO output can be attached directly to the single chip microcomputer, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change;
4, the DO output can be directly driven our relay module, which can form a light-operated switch.
5, small plate analog output AO and AD module, through the AD conversion, can obtain more accurate values of environmental light;
Product connection details:
1, VCC power supply positive
2, GND connect power cathode
3, DO TTL switch signal output
4, AO analog signal o
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000