Mô-đun bộ nhớ RAM KVR13N9S8/4 Desktop Kingston Technology 4GB 1333 MHz 240Pin DDR3 SDRAM
660.000
₫ 481.800
Sản phẩm Mô-đun bộ nhớ RAM KVR13N9S8/4 Desktop Kingston Technology 4GB 1333 MHz 240Pin DDR3 SDRAM đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 660.000 xuống còn ₫ 481.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Lifetime Warranty!
DESCRIPTION:
This document describes ValueRAM's 512M x 64-bit (4GB)
DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory
module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency
DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses
gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration: Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)
Form Factor: SO-DIMM Desktop RAM Memory
Number of Pins: 240 Pin
Bus Speed:PC3-10600 DDR3-1333MHz
Capacity per Module: 4GB
Voltage:1.5V
LIFETIME WARRANTY
Non-Ecc,Non-Registered,Unbuffered
Package included:
Kingston 4GB PC3-10600 DDR3 1333MHz Desktop memo
DESCRIPTION:
This document describes ValueRAM's 512M x 64-bit (4GB)
DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory
module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency
DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses
gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration: Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)
Form Factor: SO-DIMM Desktop RAM Memory
Number of Pins: 240 Pin
Bus Speed:PC3-10600 DDR3-1333MHz
Capacity per Module: 4GB
Voltage:1.5V
LIFETIME WARRANTY
Non-Ecc,Non-Registered,Unbuffered
Package included:
Kingston 4GB PC3-10600 DDR3 1333MHz Desktop memo
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000