Mô-Đun Bảng Mạch Điều Khiển Wifi Esp8266 Esp-12E L293D Dual High H-Bridge Module
₫ 30.000
Sản phẩm Mô-Đun Bảng Mạch Điều Khiển Wifi Esp8266 Esp-12E L293D Dual High H-Bridge Module đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
L293D For ESP8266 ESP-12E Dual High H-Bridge Module For Wireless WIFI NodeMcu Motor Driver Shield Board WIFI V3 CP2102
Feature:
1. ESP12 DEV KITDevelopment board expansion module;
2. Leads all function pins of ESP12 DEV KIT: SPI, UART, GPIO, AI and 3.3V power interface;
3. Expand two-way motor drive to directly drive two motors;
4. Onboard power switch;
5. Motor power supply range: 4.5V~36V;
6. Control power supply range: 4.5V~9V;
7. Motor power supply and control power supply are separated. In the experiment, VIN and VM can be short-circuited by short-circuit block combination, and the motor and control board can be supplied with power.
Power input:
Motor power supply (VM): 4.5V ~ 36V, can be powered separately
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately
Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control
Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)
Drive part of the work current Io: ≤1.2A
Maximum power dissipation: 4W (T = 90 ℃)
Control signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V
Working temperature: -25 ℃ ~ + 125 ℃
Drive Type: Dual high-power H-bridge driver
ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)
Expand two-way motor-driven, two-way direct drive motor
Onboard power switch
Motor power, control power separation; In the experiment, by short-circuiting block the merger,
the VIN and VM short, while power to the motor and the control board
Notice:
When inserted into the ESP-12E module,
please note the direction consistent with an expansion board antenna
With the shorting module, the control board and the motor can be powered simultaneously.
Package Included:
1pcs x L293D Wifi Motor Drive Shield Module For Arduino NodeMcu ESP8266 ESP-1
Feature:
1. ESP12 DEV KITDevelopment board expansion module;
2. Leads all function pins of ESP12 DEV KIT: SPI, UART, GPIO, AI and 3.3V power interface;
3. Expand two-way motor drive to directly drive two motors;
4. Onboard power switch;
5. Motor power supply range: 4.5V~36V;
6. Control power supply range: 4.5V~9V;
7. Motor power supply and control power supply are separated. In the experiment, VIN and VM can be short-circuited by short-circuit block combination, and the motor and control board can be supplied with power.
Power input:
Motor power supply (VM): 4.5V ~ 36V, can be powered separately
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately
Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control
Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)
Drive part of the work current Io: ≤1.2A
Maximum power dissipation: 4W (T = 90 ℃)
Control signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V
Working temperature: -25 ℃ ~ + 125 ℃
Drive Type: Dual high-power H-bridge driver
ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)
Expand two-way motor-driven, two-way direct drive motor
Onboard power switch
Motor power, control power separation; In the experiment, by short-circuiting block the merger,
the VIN and VM short, while power to the motor and the control board
Notice:
When inserted into the ESP-12E module,
please note the direction consistent with an expansion board antenna
With the shorting module, the control board and the motor can be powered simultaneously.
Package Included:
1pcs x L293D Wifi Motor Drive Shield Module For Arduino NodeMcu ESP8266 ESP-1