Millet Wifi Repeater Gen 2 Activator - Speed 300mb / s

1 / Specifications:
The device supports wifi reception and playback to increase Wifi coverage.
Extremely compact design
Use normal 5v-1A power supply
Easy to install with Android phones and Iphone
Supports forwarding and renaming
New technology enhances the ability to receive and transmit wifi effectively
Compared with the first generation, wifi gen 2 is smaller in size, and has significantly improved speed of 300Mps
2 / XIAOMI WIFI setup instructions 2
Step 1: First, let https://account.xiaomi.com/pass/register create a mill account.
Once created, download the MiHome app to install the tuner. Note: Currently, Mi home only supports 2 operating systems, iOS and Android.
Download MiHome for Android and IOS here: http://home.mi.com/d Download
Or go to CH Play / App Store and type: MiHome to download the app. Then run the application and login to the Xiaomi account you just created. When logging in, remember to choose the location for Mainland China.
Step 2:
Using the iOS operating system:
- First, accessing the Wifi network on your phone requires activation
- Then plug the repeater into the USB port for power supply (5V or 1A charger or power from a computer USB thumb drive. Please note that the original charger is in use). Wait about 3 minutes to stabilize the Repeater and proceed to the next step.
- Next, open the Mihome software, press the logo (+) in the upper right corner, select Add a device, select a transition image, highlight a yellow light for flash, then click Next, then enter the password wifi you just connected.
- Next, MiHome will force us to access the wifi settings of iPhone and then, a new wifi will appear, named Xiaomi_Vpeater ...., please connect to the wifi network.
- Finally, back to MiHome, Mihome will temporarily install the rest. During the process up to 100%, if the connection is successful, the yellow light will turn green.
If that fails, the indicator light remains yellow. Insert the SIM card into the reset button for about 10 seconds, then release and wait for 3 minutes, then repeat the above steps to reset the transponder.
For Android operating system:
- First, accessing the Wifi network on your phone requires activation
- Then plug the repeater into the USB port to power up (the 5v-1a charger or power from the computer's USB drive. Wait about 3 minutes for the repeater to stabilize, then move on to the next step.
Next, open the Mihome software, click the top right corner of (+) and select Add devic. The Mihone will now locate the device near the phone and select it. Check the yellow light for flashing, then click Next and enter the connected wifi password above.
- Wait for Mi to go home to install it. During the process up to 100%, if the connection is successful, the yellow light will turn green.
If that fails, the indicator light remains yellow. Insert the SIM card into the reset button for about 10 seconds, then release and wait for 3 minutes, then repeat the above steps to reset the transpo