Miếng Đệm Silicone Cách Nhiệt Cho Động Cơ 0527 300w 220v 10x15cm
₫ 80.000
Sản phẩm Miếng Đệm Silicone Cách Nhiệt Cho Động Cơ 0527 300w 220v 10x15cm đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store newwellknown.Wish you have a good shopping.
Features:
The heat conduction is good, and the current density can reach 3W/cm2 when the working temperature does
Not exceed 240 °C.
Working temperature is allowed to be less than 150 °C.
Breakdown voltage up to 20~50KV/mm.
Safe, waterproof and moisture-proof.
Specification:
Brand new
Material: alloy heating wire + silicone rubber
Color: Orange
Size: 10x15cm 300W
Voltage: 220V
Power: 300W
Line length: 100cm
Package included:
1 x Silicone Heating Pad
Attention
If the temperature of the heating piece is too high and burnt out, this must be peeled off the paper and completely attached to the bottom case of the fuel tank. There must be no gap.
The heating film should not be burnt, it must be completely attached before it can be energized, otherwise it will burn out.
Note:
Please allow 1-5mm errors due to manual measurement.
Due to light and screen setting difference, the color of the item may be slightly different from pict
Features:
The heat conduction is good, and the current density can reach 3W/cm2 when the working temperature does
Not exceed 240 °C.
Working temperature is allowed to be less than 150 °C.
Breakdown voltage up to 20~50KV/mm.
Safe, waterproof and moisture-proof.
Specification:
Brand new
Material: alloy heating wire + silicone rubber
Color: Orange
Size: 10x15cm 300W
Voltage: 220V
Power: 300W
Line length: 100cm
Package included:
1 x Silicone Heating Pad
Attention
If the temperature of the heating piece is too high and burnt out, this must be peeled off the paper and completely attached to the bottom case of the fuel tank. There must be no gap.
The heating film should not be burnt, it must be completely attached before it can be energized, otherwise it will burn out.
Note:
Please allow 1-5mm errors due to manual measurement.
Due to light and screen setting difference, the color of the item may be slightly different from pict
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000