Miếng dán kính cửa sổ chống nắng 90cm*200cm

⭐️ONE WAY MIRROR EFFECT - The reflective privacy window film provides a one way vision effect under the correct conditions for great intended privacy during daytime only which means the outside glass will show a mirror effect to stop people seeing whilst you can still see out during daylight hours; the mirror-effect is reversed at night since the interior will be exposed to more light than the exterior, and you will be looking at a slight mirror.
UV REJECTION AND ENERGY SAVING - Blocking out 85% of infrared rays and 99% of UV rays to make your skin feel comfortable and protect interior furnishings from premature fading and prolong the service life, the heat reflective window film can retain heat in winter and keep it out in summer,mirror films help reduce expensive heating and cooling costs.

⭐️NEW GLUE DESIGN: No messy glue needed. It is not sticky after water immersion and easier to install than a glue film; after the water is dry, the viscosity is restored and it is stronger than the glueless one, remember to use A LOT of soap/water mixture to soak both the adhesive side and window.
EASY AND QUICK TO INSTALL: Use a lot of soapy water or water to soak both the adhesive side and your smooth and clean glass windows, remove all bubbles after the paste. No residue after removal.



⭐️Adhesive film with mirror effect
The perception of one-way transmission is achieved when one side of the mirror is brightly lit and the other side is dark. This allows viewing from the darkened side but not vice versa. The face to the brighter environment will show a mirror effect and reflect lights.

⭐️Decorate your house with DIY
It is recommended to stick on the stained glass windows with problems of insolation, blinding and overheating of internal environments, the Rabbitgoo sun protection film can protect your furniture from bleaching and make your house more beautiful.

😊Installation Instructions:😊

-Clean the target surface thoroughly.
-Measure the surface and cut the film. Leave an extra inch margin each side for an easy adjustment.
-Prepare enough diluted soapy water in a spray bottle.
-Spray the surface with the soapy water. Peel off the transparent backing film along a short side.
-Install the film onto the window.
-Use the squeegee to remove excess water and any bubbles whist applying the film. Wipe off the water using the towel.
-Trim off the margins. Here you go!

Product specifications:
17.7" x 78.7" (45*200cm): width 45cm* length 200cm
23.6" x 78.7" (60*200cm): width 60cm* length 200cm
35.4" x 78.7" (90*200cm): width 90cm* length