Máy tính xách tay CPU Intel Core2 Duo T9400 T9550 T9600 GM/PM45


₫ 200.800

Sản phẩm Máy tính xách tay CPU Intel Core2 Duo T9400 T9550 T9600 GM/PM45 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam

Package 1: T9400 2.53G 6M 1066 original official version of PGA

Package 2: T9550 2.66G 6M 1066 Original official version of PGA shop recommended

Package 3: T9600 2.8G 6M 10666 Original official version of PGA [performance comparable to T9800, the price is only half of T9800, super cost-effective, the owner strongly recommends upgrading this! 】

Package 4: T9800 2.93G 6M 1066 Original official version PGA

Must read before installing the CPU:

-Remove the original CPU, clean the dust on the fan and heat sink, and clean the original silicone grease remaining on the heat sink. Especially the hardened silicone grease must be thoroughly cleaned. This is very important!
-Insert the newly purchased CPU in the correct direction and apply a layer of silicone grease on top of the CPU. Do not apply too much, just enough to fill the gap between the top of the CPU and the heat sink. (Taking a small amount of silicone grease in a needle tube as an example, it is suitable to squeeze 2-3 small cells of silicone grease)
3, replace the heat sink, first use your fingers to press the heat sink up and down and left and right to move a few times, let the silicone grease inside evenly spread and discharge the air, and then follow the numerical order marked on the fixing screws on the heat sink (or diagonally) Tighten one by one, rotate a few turns each time and then unscrew a screw. Do not turn one screw at a time, and rotate it one by one until it is fixed.

Note: After changing the CPU, if the CPU temperature is too high, or the temperature is high and low, please carefully check the above 3 items and check if the quality of the silicone grease is too bad. Most of the problems can be solved like