Máy Tạo Ozone Khử Mùi 200mg Hhihi Dc12V

Hello dear, welcome to our hhihi, all items are ready stock, excellent quality and reasonable price, we'll arrange the shipment once receiving your order, carefully inspect every detail before consignment.
Also beautiful gifts for you, please follow us❤❤

Features:
Made of high quality ABS material, it is durable and resistant to damage.
Mainly used for indoor or indoor air purification and disinfection.
It is suitable for household air purification and disinfection, wardrobe disinfection, ease of bathroom odor, fruit and vegetable preservation.
DIY ozone air purifier is very suitable for household water purification equipment, air purification equipment, household appliances equipment.
It is very convenient to use and install, keeping the air clean.

Specifications:
Condition: 100% Brand New
Material: ABS
Input voltage: DC12V
Ozone concentration: 200mg/h
Working battery: 350-42mA
Power:
Size: approx. 6.4*2.3*3cm / 2.5*0.9*1.2in
Input Voltage
DC12V
Work frequency
50Hz/60Hz
Output Voltage
2.5KV AC
Ozone density
200mg/H
Power
＜8w
Use temperature range
 -10℃~+60℃
Use humidity range
35%~85%
Storage temperature
 -20℃~+70℃
High temperature specialty
No electricity, under temperature 70 degree environment, no abnormal phenomenon is placed after 72 hours
Low temperature specialty
No electricity, under temperature 70 degree environment, no abnormal phenomenon is placed after 72 hours
Up to earth test
At 100cm above the ground, free fall into the wood, can still work normally.

Package List:
1 * Ozone Generator
1 * English Manual

Note:
1. The product has a single working time of no more than 30 minutes.
2. After 20 minutes of work, it takes 5-10 minutes to dissipate heat, which is beneficial to extend the service life of the product.
3. AC power supply does not need to be divided into zero line / live line, direct power supply to the power supply: red line access "+12V", red line access "-12".
4. Ozone ceramic sheets are easily damaged. Do not press hard. When using electric soldering iron to solder ozone, please pay attention to setting the temperature to about 350-400 degrees. When welding the ozone sheet, the welding time should not exceed 2 seconds to avoid damage to the ceramic she