Máy Quay Mini Md80 Hd Chuyển Động Dv Dvr Kèm Phụ Kiện Thẻ
242.300
₫ 121.800
Sản phẩm Máy Quay Mini Md80 Hd Chuyển Động Dv Dvr Kèm Phụ Kiện Thẻ đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 242.300 xuống còn ₫ 121.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Product manual:
》 Power and video: lightly press the power button, the green indicator light is on, the machine is in a state ready to start, and immediately switches to standby. Click the record / stop button at the top, the green light is always on, the red light starts to flash slowly, and the camera starts recording. The resolution of the recorded file is 720X480, and the frame number is 30fps / S. Press the Record / Stop button again briefly to stop recording and save the file automatically. After saving, the red light stays on. To continue recording, press the Record / Stop button again.
》 Voice Control Camera:
Press the power button lightly, the blue indicator light is on. At this point, you can press the MODE button to switch to the voice-activated camera mode. At this time, the blue light is always on and the red light is flashing rapidly (indicating the voice-activated standby state). When the sound at the recording site exceeds 60 dB, D001 starts automatic video recording. At this time, the blue light is always on, and the red light is flashing slowly (indicating that sound is being recorded).
After starting each voice-activated recording, the minimum time for each video is 2 minutes. After 2 minutes of recording, if the recording scene is silent, the recording file will be automatically saved and switched to standby; if it is recorded for 2 minutes, there will still be sound in the scene after that, and the recording will continue for a while.
!! Each time the system is powered on, the system will self-test and analyze the TAG.TXT file, and set the system time based on the internal time. After the setting is completed, the system will automatically delete the file!
》 Close:
In the camera state or standby state, press and hold the power button for 3 seconds, release the button, and then wait for the light to go out, indicating that the machine is turned off.
》 Connect to computer:
-In the off state, standby state or video state, you can connect directly to the computer. When connected to a computer, it can be used as a USB flash drive, and you can freely copy, cut and delete files.
-After inserting the machine into the computer's USB port, the removable disk logo will pop up in a few seconds. After a short flash, the red light is always on and the green light is always on.
prompt:
a. After connecting the machine to the computer, if the computer does not recognize the computer, or the removable disk logo does not pop up after 30 seconds, reinsert the computer.
b. It is recommended to copy or cut the recorded video files to the computer's hard disk for playback, and then directly play the video files stored in the internal memory of the recorder. The data may be too large and the transmission cannot keep up with playback. Not smooth.
》 Restart:
-If the machine works abnormally due to illegal operation or other unknown reasons; the specific operation method is: use a thin stick (toothpick) to directly press the "Reset" but
》 Power and video: lightly press the power button, the green indicator light is on, the machine is in a state ready to start, and immediately switches to standby. Click the record / stop button at the top, the green light is always on, the red light starts to flash slowly, and the camera starts recording. The resolution of the recorded file is 720X480, and the frame number is 30fps / S. Press the Record / Stop button again briefly to stop recording and save the file automatically. After saving, the red light stays on. To continue recording, press the Record / Stop button again.
》 Voice Control Camera:
Press the power button lightly, the blue indicator light is on. At this point, you can press the MODE button to switch to the voice-activated camera mode. At this time, the blue light is always on and the red light is flashing rapidly (indicating the voice-activated standby state). When the sound at the recording site exceeds 60 dB, D001 starts automatic video recording. At this time, the blue light is always on, and the red light is flashing slowly (indicating that sound is being recorded).
After starting each voice-activated recording, the minimum time for each video is 2 minutes. After 2 minutes of recording, if the recording scene is silent, the recording file will be automatically saved and switched to standby; if it is recorded for 2 minutes, there will still be sound in the scene after that, and the recording will continue for a while.
!! Each time the system is powered on, the system will self-test and analyze the TAG.TXT file, and set the system time based on the internal time. After the setting is completed, the system will automatically delete the file!
》 Close:
In the camera state or standby state, press and hold the power button for 3 seconds, release the button, and then wait for the light to go out, indicating that the machine is turned off.
》 Connect to computer:
-In the off state, standby state or video state, you can connect directly to the computer. When connected to a computer, it can be used as a USB flash drive, and you can freely copy, cut and delete files.
-After inserting the machine into the computer's USB port, the removable disk logo will pop up in a few seconds. After a short flash, the red light is always on and the green light is always on.
prompt:
a. After connecting the machine to the computer, if the computer does not recognize the computer, or the removable disk logo does not pop up after 30 seconds, reinsert the computer.
b. It is recommended to copy or cut the recorded video files to the computer's hard disk for playback, and then directly play the video files stored in the internal memory of the recorder. The data may be too large and the transmission cannot keep up with playback. Not smooth.
》 Restart:
-If the machine works abnormally due to illegal operation or other unknown reasons; the specific operation method is: use a thin stick (toothpick) to directly press the "Reset" but