Máy phát tín hiệu kỹ thuật số có thể điều chỉnh điện áp +/- 10V đầu ra DAC
327.000
₫ 179.850
Sản phẩm Máy phát tín hiệu kỹ thuật số có thể điều chỉnh điện áp +/- 10V đầu ra DAC đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 327.000 xuống còn ₫ 179.850, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
1 Small jitter: 0.1mV jitter change, suitable for controlling the occasions with high ripple requirements, at the output and some
Capacitors may work better ( pay attention to capacitor polarity);
2 Can be set to a variety of outputs: dual output ± 10.00V / ± 5.00V single output 0-10.00V / 2-10.00V...0-1.00V and so on;
3 When single output is 0V can really reach 0, it is suitable for this output occasion of small signal such as 0-1.00V;
4 Digital Encoder Knob, how much is output when it is rotated;
5 Knob rotates the coarse and fine adjustment dual mode, the number of turns can be set to 1-100 circles;
6 4-digit digital tube, 0.01 change;
7 setting and adjustment value power-down storage;
Technical indicators:
Power supply voltage: DC8-28V, power 1W;
Maximum output voltage range: ±10V Maximum load current: 20mA; Accuracy: 0.01V
Encoder knob one pulse number 20;
4-digit 0.4 inch digital tube;
Note:Provide a detailed PDF version of the English manual. Please contact us if you need.
Package include:
1pc Digital Signal Generator
-----------------------
System operation:
(The knob is pressed to "OK"], the clockwise rotation is "+", and the counterclockwise rotation is "-< >"):
5.1 After the knob adjusts the output, there is no operation for 3 seconds, the output value is automatically saved; or short press the enter key to save the output immediately.
After the value is released, the screen displays "..." and the save is successful;
5.2 Parameter settings:
5.2.1 Press and hold the confirmation button on the normal operation screen for 2 seconds to enter the setting state, and display “F001” (parameter number 001);
5.2.2 Rotate the knob to change the parameter number (the first time you enter F002, you need to enter the password “+ - - + (rotate knob)”);
5.2.3 Parameter number interface, press the enter key to enter the corresponding parameter value setting, and rotate the knob to modify the parameters;
5.2.4 Press the Enter key to save the parameter, exit the parameter setting, and display the next parameter number (no password F001 is entered)
After the value is set, it will enter the normal operation screen);
5.2.5 Rotate the knob directly to the last parameter number, press the OK button, and the setting is completed to enter the normal operation screen;
5.2.6 After the parameter setting screen has not been operated for more than 10s, it will exit the setting state and enter the normal operation sc
1 Small jitter: 0.1mV jitter change, suitable for controlling the occasions with high ripple requirements, at the output and some
Capacitors may work better ( pay attention to capacitor polarity);
2 Can be set to a variety of outputs: dual output ± 10.00V / ± 5.00V single output 0-10.00V / 2-10.00V...0-1.00V and so on;
3 When single output is 0V can really reach 0, it is suitable for this output occasion of small signal such as 0-1.00V;
4 Digital Encoder Knob, how much is output when it is rotated;
5 Knob rotates the coarse and fine adjustment dual mode, the number of turns can be set to 1-100 circles;
6 4-digit digital tube, 0.01 change;
7 setting and adjustment value power-down storage;
Technical indicators:
Power supply voltage: DC8-28V, power 1W;
Maximum output voltage range: ±10V Maximum load current: 20mA; Accuracy: 0.01V
Encoder knob one pulse number 20;
4-digit 0.4 inch digital tube;
Note:Provide a detailed PDF version of the English manual. Please contact us if you need.
Package include:
1pc Digital Signal Generator
-----------------------
System operation:
(The knob is pressed to "OK"], the clockwise rotation is "+
5.1 After the knob adjusts the output, there is no operation for 3 seconds, the output value is automatically saved; or short press the enter key to save the output immediately.
After the value is released, the screen displays "..." and the save is successful;
5.2 Parameter settings:
5.2.1 Press and hold the confirmation button on the normal operation screen for 2 seconds to enter the setting state, and display “F001” (parameter number 001);
5.2.2 Rotate the knob to change the parameter number (the first time you enter F002, you need to enter the password “+ - - + (rotate knob)”);
5.2.3 Parameter number interface, press the enter key to enter the corresponding parameter value setting, and rotate the knob to modify the parameters;
5.2.4 Press the Enter key to save the parameter, exit the parameter setting, and display the next parameter number (no password F001 is entered)
After the value is set, it will enter the normal operation screen);
5.2.5 Rotate the knob directly to the last parameter number, press the OK button, and the setting is completed to enter the normal operation screen;
5.2.6 After the parameter setting screen has not been operated for more than 10s, it will exit the setting state and enter the normal operation sc
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000