Máy Kiểm Tra Tải Điện Thông Minh 150v 10a 150w

150V 10A 150W intelligent electronic load battery discharge capacity tester

SPECIFICATIONS

PowerVoltage:DC6~12V Interface:DC5.0

Voltage measure range:0~150V Accuracy:0.05V

Current adjustable range:0~10A Accuracy:0.05A

Capacity range:0~999.999Ah Accuracy:0.001Ah

Cumulative range:0~99999.9Wh Accuracy:0.01Wh

Measure range:0~2999.9W Accuracy:0.01W

Impedance range:0~999.9Ω Accuracy:0.01Ω

Temperature range:0~99℃ Accuracy:1℃

Max timing :999:59:59 Accuracy:1s

Fan cooling power:＜150W

Fan control threshold：Temp＞40℃

Standby reminder threshold：＜2W/0.5h;

Timing function：＞0.5W start timing

Input interface: 20A high current occlusion screw column, type A USB,Mini USB, Micro USB, Type-C USB

Refresh time:＞500ms/time

Measurement rate: 0.5time/s

Over limit alarm: interface warning and buzzer alarm

Voltage overrun auto- stops discharge range:0~150V

Current overrun auto- stops discharge range:0~10A

Power overrun auto- stops discharge range:0~150W

Display screen: LCM display

Size：149×96×80mm/195×105×135mm(package）

Weight：570g（package）/370g(net weight）

Consumption：＜1.5A

Operating temp：-10~60℃

Operating humidity：10~80（No condensation）

Mode button function description

1. Click to switch each display interface

2. The function of the button operation in the 2-4 interface is as follows:

①long press all records to clear;

②Double-click capacity (Ah) to reset to zero;

③three-stroke power (Wh) reset to zero;

④four-stroke power (00:00:00) reset to zero;

⑤consecutive seven hits at no load, making the current zero accurate in the current temperature environment.Calibration is zeroed for accurate measurement at low currents;Factory reset all parameters.

3. The operation functions of the buttons under the interfaces 6, 7, 9, 11, and 13 are as follows:

①Double-click the parameter value to increase, double-click and long press the parameter to continue to increase;

②The value of the three-stroke parameter is reduced, and the length of the three-stroke is continued to decrease.

How to use

1. Input voltage × current ≤ 150W;

2. Turn on the load power supply, and the coarse and fine adjustment knobs will be reset to zero (counterclockwise to the end)

3. Long press the mode button to clear all data;

4. Connect to the power supply under test, and use the fine adjustment knob to slowly adjust the discharge current.When the fine adjustment cannot meet the current value, the fine adjustment is reset to zero, and the coarse adjustment knob is slowly adjusted.And with fine adjustment until the required current value is reached.

5. It is recommended to set the cutoff voltage (lower voltage input) when the battery is discharged.In order to avoid damage caused by excessive discharge.

Default parameter:

Input voltage upper limit:150V

Input voltage lower limit:0V

Input current limit:10A

Test power limit