Máy In Epson L360 Eprom Ic L360 Epson L360
₫ 57.500
Sản phẩm Máy In Epson L360 Eprom Ic L360 Epson L360 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Eprom epson l360, ic counter l360, ic eeprom reset epson l360
In epson 's latest series of printers, many cannot be reset by using the l360 resetter software or software adjustment. For such constraints it can be overcome by replacing the eeprom ic on the mainboard. In addition, the eeprom ic can be implemented to solve problems with the mainboard with bios error or corrupt.
Condition:
New
Programd.
100% tested and running normally
Printer support:
Epson l360.
Installl ic way:
- lce feet with flux
- soldering ic feet with a little tin, make sure tin fuses with the ic legs, this is done because the ic legs have never been hit by tin.
- put ic on board according to position, don 't flip.
- imperfect installlation (tin is not fused on the ic feet). Resulting in error or blink 9x
- the hot ic can break and blink 9x too.
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to b
In epson 's latest series of printers, many cannot be reset by using the l360 resetter software or software adjustment. For such constraints it can be overcome by replacing the eeprom ic on the mainboard. In addition, the eeprom ic can be implemented to solve problems with the mainboard with bios error or corrupt.
Condition:
New
Programd.
100% tested and running normally
Printer support:
Epson l360.
Installl ic way:
- lce feet with flux
- soldering ic feet with a little tin, make sure tin fuses with the ic legs, this is done because the ic legs have never been hit by tin.
- put ic on board according to position, don 't flip.
- imperfect installlation (tin is not fused on the ic feet). Resulting in error or blink 9x
- the hot ic can break and blink 9x too.
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to b