Máy In Epson L120 Eprom Ic Epson L120 Eeprom Reset Ic Epson L120
₫ 52.300
Sản phẩm Máy In Epson L120 Eprom Ic Epson L120 Eeprom Reset Ic Epson L120 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Eprom epson l120, ic counter l120, ic eeprom reset epson l120
In epson 's latest series of printers, many cannot be reset by using the l120 resetter software or software adjustment. For such constraints it can be overcome by replacing the eeprom ic on the mainboard. In addition, the eeprom ic can be implemented to solve problems with the mainboard with bios error or corrupt.
Condition of eprom l120:
New
Programd. 100% tested and running normally
Eprom l120 support printer:
Epson l120.
Eprom l120 ic installlation mode:
- lce feet with flux
- soldering ic feet with a little tin, make sure tin fuses with the ic legs, this is done because the ic legs have never been hit by tin.
- put ic on board according to position, don 't flip.
- imperfect installlation (tin is not fused on the ic feet). Resulting in error or blink 9x
- the hot ic can break and blink 9x too.
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to break.
If there 's trouble the mainboard can be sent to us at a cost of installling 7
In epson 's latest series of printers, many cannot be reset by using the l120 resetter software or software adjustment. For such constraints it can be overcome by replacing the eeprom ic on the mainboard. In addition, the eeprom ic can be implemented to solve problems with the mainboard with bios error or corrupt.
Condition of eprom l120:
New
Programd. 100% tested and running normally
Eprom l120 support printer:
Epson l120.
Eprom l120 ic installlation mode:
- lce feet with flux
- soldering ic feet with a little tin, make sure tin fuses with the ic legs, this is done because the ic legs have never been hit by tin.
- put ic on board according to position, don 't flip.
- imperfect installlation (tin is not fused on the ic feet). Resulting in error or blink 9x
- the hot ic can break and blink 9x too.
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to break.
If there 's trouble the mainboard can be sent to us at a cost of installling 7
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000