Máy In Eprom Ic Canon G2010 T16, Eeprom Ic Reset Canon G2010, Canon G2010 T16
₫ 57.500
Sản phẩm Máy In Eprom Ic Canon G2010 T16, Eeprom Ic Reset Canon G2010, Canon G2010 T16 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Eprom canon g2010, g2010 counter ic, eeprom t16 reset canon g2010
The canon g2010 printer is the latest variant of the canon yaang manufacturer using a factory infusion system. To date the canon g2010 resetter software has not existed and the canon g2010 reset method has to replace the eprom ic or eeprom ic or ic counter.
Condition:
New item
Ic code: T16
Programd.
Guaranteed 100% work well on canon g2010 printer
Tested on canon g2010 printer
Eprom or eprom canon g2010 functions include:
For canon g2010 printer reset
Coping with error code
Installl ic way:
- lce feet with flux
- soldering ic feet with a little tin, make sure tin fuses with the ic legs, this is done because the ic legs have never been hit by tin.
- put ic on board according to position, don 't flip.
- imperfect installlation (tin is not fused on the ic feet). Resulting in error or blink 9x
- the hot ic can break and blink 9x too.
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to b
The canon g2010 printer is the latest variant of the canon yaang manufacturer using a factory infusion system. To date the canon g2010 resetter software has not existed and the canon g2010 reset method has to replace the eprom ic or eeprom ic or ic counter.
Condition:
New item
Ic code: T16
Programd.
Guaranteed 100% work well on canon g2010 printer
Tested on canon g2010 printer
Eprom or eprom canon g2010 functions include:
For canon g2010 printer reset
Coping with error code
Installl ic way:
- lce feet with flux
- soldering ic feet with a little tin, make sure tin fuses with the ic legs, this is done because the ic legs have never been hit by tin.
- put ic on board according to position, don 't flip.
- imperfect installlation (tin is not fused on the ic feet). Resulting in error or blink 9x
- the hot ic can break and blink 9x too.
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to b