Thiết bị đo dao động kỹ thuật số DSO138 Inch TFT
₫ 115.000
Sản phẩm Thiết bị đo dao động kỹ thuật số DSO138 Inch TFT đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
❤DSO138 2.4 Inch TFT Digital Oscilloscope Welded/DIY Parts Kit/Acrylic
Features:
With automatic, conventional and single trigger mode, easy to capture the instantaneous waveform.
Can be triggered by rising or falling edges.
The trigger level is adjustable and with indication.
Waveforms before observable triggering (Negative delay).
Can freeze waveform display (HOLD function) at any time.
Descriptions:
Square wave test signal source with 1KHz /3.3V.
With waveform parameter digital display, the parameters can be displayed: frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak, rms.
Save/bring out the waveform, turn off the waveform does not disappear.
Specifications:
Model: DSO138
Material: Acrylic, metal
Color: red & black, transparent
Size: 128*88*27mm
Highest real-time sampling rate: 1Msps
Accuracy: 12Bit
Depth of sample buffer: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV/Div – 5V/Div (progressive by 1-2-5)
The vertical displacement is adjustable with indication
Input impedance: 1M ohm
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
The coupling modes: DC/AC/GND
Horizontal time base range: 10μs/Div – 50s/Div(step by 1-2-5)
Package Included:
1 x Welded Oscilloscope / DIY Parts Kit
Note:
-Please allow slight dimension difference due to different manual measurement.
-Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank
Features:
With automatic, conventional and single trigger mode, easy to capture the instantaneous waveform.
Can be triggered by rising or falling edges.
The trigger level is adjustable and with indication.
Waveforms before observable triggering (Negative delay).
Can freeze waveform display (HOLD function) at any time.
Descriptions:
Square wave test signal source with 1KHz /3.3V.
With waveform parameter digital display, the parameters can be displayed: frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak, rms.
Save/bring out the waveform, turn off the waveform does not disappear.
Specifications:
Model: DSO138
Material: Acrylic, metal
Color: red & black, transparent
Size: 128*88*27mm
Highest real-time sampling rate: 1Msps
Accuracy: 12Bit
Depth of sample buffer: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV/Div – 5V/Div (progressive by 1-2-5)
The vertical displacement is adjustable with indication
Input impedance: 1M ohm
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
The coupling modes: DC/AC/GND
Horizontal time base range: 10μs/Div – 50s/Div(step by 1-2-5)
Package Included:
1 x Welded Oscilloscope / DIY Parts Kit
Note:
-Please allow slight dimension difference due to different manual measurement.
-Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank
Sản Phẩm Liên Quan
HOT
Bọt biển vệ sinh mũi mỏ hàn
₫ 2.000
HOT
Dây hơi khí nén PU bán theo mét
₫ 3.500