Máy Hàn Điện Mini 2 Loại Cho Pin 18650 Lithium 12v

Specification:
Material: PC
Size: 100x50mm/3.94x1.97in
Including: 1 X controller, 1pair X soldering pens, including soldering pins, U-type cold-pressed terminals, the total length of the soldering pen is about 30cm/11.81in
1 X Red power input line, 1 X Blue power input line, 10AWG, 20cm/7.87in long, 1pair X U-shaped cold-pressed terminals (for input power supply), Thousands of heat shrinkable tubes, used to shrink the power input line

Tip:
1. This control is mainly for people who maintain or play with power banks, power tools, and airplane models. Because the amount of battery to be welded is not so large, it is not cost-effective to make a transformer spot welder, so this control pan is more suitable. Find a 3S 50C 5000mAh, or 12V 50Ah or above battery, you can weld. Very convenient.
2. This control is designed to reduce the requirements of users as much as possible, but it still requires users to have a certain electronic foundation and safety awareness. If you can't even use a multimeter, and you can't distinguish between AC and DC, then it is recommended not to use it.
3. Although sufficient design and protection of the MOS tube drive have been made during the design, it is inevitable that the explosion tube phenomenon will occur during use. If there is a explosion tube, it is enough to replace one.
4. There are individual users who have high welding requirements, and the controller does not meet their own welding requirements. If this happens, please replace the welding power source. After our own actual use, when the battery adopts 3S, 40C5 000mAh, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly.
It is necessary to polish the welding needle into a round head, the pressing force is reduced, and it can also be welded! When the battery is a 12V 50Ah car battery, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.

Included:
1 X Spot Welding Machine Set

#spotwelder #transistor #welderminispot #lcddisplay #minispot #spotweldingmachineset #PowerSupply #posteasouder #weldingmachine #modelairplane #weldermachine #Steel #minispotwelding #PowerTools #weldingtool #welder #circuitboard #powerinpu