Máy Ghi Dữ Liệu Dioo Tempu05 Cổng Usb Sử Dụng Một Lần Pdf

--------------------------------------------- *Welcome Dioo Store* ----------------------------------------------
❀We insist on giving you the best products at the lowest price❀
✔Ready to sent ✔High quality ✔Best price
--------------------------------------------------- * Product * ---------------------------------------------------

Feature:
-Widely used for monitoring food, drugs, chemical products and other transport and storage process.
-After the record ends, you can directly insert the computer to get PDF report.
-Built in USB connector, directly connect PC or cellphone, no cable or reader required.
-With high precision ±0.5°C and high sensitivity.
-It has small and compact size, easy to carry.
-Wide range of temperature measurement, it can store 10,000 data.

Specification:
Condition: 100% Brand New
Item Type: Temperature Recorder
Material: Plastic
Color: As shown in the picture
Size: Approx.67x28mm/2.64x1.1in(L x W)Weight: Approx.13g/0.5oz
Type: Single use
Log Interval: 10 minutes
Accuracy: ±0.5°C(-20°C~+40°C)
Out of Range: ±1°C
Data Capacity: 10000
Alarm Temperature Range: 8°C( 46.4°F)
Start Delay: 30minutes
Working Environment Temperature: -30°C~+60°C
Instructions:
-Press and hold the “Start/Stop” button for more than 3s, the “OK” indicator will be on for 3S, indicating that the device starts recording, and then you can place the device in the environment you need to monitor.
-During the recording process, the device will automatically light every 10s. If the normal indicator light (ie green light) is lit every 10s, it means that the device is not over temperature during the recording process. If the alarm indicator light (ie red light) is illuminated every 10 seconds, Explain that over-temperature has occurred during the recording process.
Note:
As long as over-temperature is found during the recording process, the green light will no longer illuminate.
-Press and hold the “Start/Stop” button for more than 3s, the alarm indicator (ie red light) will be on for 3s, indicating that the device stops recording. The recording will also stop automatically when the device is full. After the device stops recording, it will not automatically flash. If the device is over-temperature during recording, press the “Start/Stop” button. If the normal indicator (green light) is on, it indicates that the temperature is not over-recorded during the recording; if the alarm is When the indicator light (ie red light) is on, it indicates that the temperature is over temperature during recording.
-Remove the waterproof packaging bag and insert the device into the computer USB interface. During the PDF file generation process, the normal indicator light (ie green light) and the alarm indicator light (ie red light) will turn on. When the file