Đầu Đọc Thẻ Từ Rfid 125khz
351.000
₫ 259.300
Sản phẩm Đầu Đọc Thẻ Từ Rfid 125khz đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 351.000 xuống còn ₫ 259.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
This device is used to clone 125Khz FRID card.
It can copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purpose.
Support 125Khz EM4100 / EM410X or compatible card /tag format (NOT compatible for HID standard!) so that you can reference the device module when you work.
This handle RFID writer is very easy to use.
You can copy the ID card, such as access cards, cell cards, parking cards.
Specifications:
Material: ABS
Supported blank tag: T5557,EM4305.
Working frequency: 125Khz
Power: 2x AAA battery(Batteries are not included)
Working status Led:Read , Write
Button: Read Button,Write Button
Handheld RFID Writer Size:11.5 x 6.8cm/4.53 x 2.68inch
Weight:155g
How to clone:
-Push power switch on the right of device, it will keep two or three
times, and LED is on mean it works, if not restart please.
-Put the other card near the antenna left of the device, and then
press READ button,the device will keep and the LED is on when read
successful, if beep 2 times go to step 3, if beep 3 times go to step
4, click READ again if it doesn't beep.
-change an new blank card as T5557/EM4305, then press WRITE
button, when beep PASS LED is on mean clone successful, if it doesn't beep
and light please write again.
-Change a blank T5557, then press WRITE button, when beep PASS LED is
on mean clone successful, if it doesn't beep and light please write
again.
-Repeat step 3 or step 4 if you want to make more same ID card.
-Switch off for save power.
Package Included:
1 x Handle RFID Writer( (battery are not included))
6 x ID tags
6 x ID
This device is used to clone 125Khz FRID card.
It can copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purpose.
Support 125Khz EM4100 / EM410X or compatible card /tag format (NOT compatible for HID standard!) so that you can reference the device module when you work.
This handle RFID writer is very easy to use.
You can copy the ID card, such as access cards, cell cards, parking cards.
Specifications:
Material: ABS
Supported blank tag: T5557,EM4305.
Working frequency: 125Khz
Power: 2x AAA battery(Batteries are not included)
Working status Led:Read , Write
Button: Read Button,Write Button
Handheld RFID Writer Size:11.5 x 6.8cm/4.53 x 2.68inch
Weight:155g
How to clone:
-Push power switch on the right of device, it will keep two or three
times, and LED is on mean it works, if not restart please.
-Put the other card near the antenna left of the device, and then
press READ button,the device will keep and the LED is on when read
successful, if beep 2 times go to step 3, if beep 3 times go to step
4, click READ again if it doesn't beep.
-change an new blank card as T5557/EM4305, then press WRITE
button, when beep PASS LED is on mean clone successful, if it doesn't beep
and light please write again.
-Change a blank T5557, then press WRITE button, when beep PASS LED is
on mean clone successful, if it doesn't beep and light please write
again.
-Repeat step 3 or step 4 if you want to make more same ID card.
-Switch off for save power.
Package Included:
1 x Handle RFID Writer( (battery are not included))
6 x ID tags
6 x ID