Máy Dò Kim Loại Cảm Biến Đa Năng

Features:
1.Advantages: Suitable for use in interior decoration structures. It can detect the position of metal and wood in the wall.
When metal and wood are sensed, the instrument will flash and sound, and it can also detect other foreign objects in the same object.
2.Wide Use: This sensor can be used to detect wall studs, metal pipes and electrical wires.
3.Reminder: It will remind you with sound signal and lighting when it detects wall studs, metal pipes and electrical wires.
4.Easy Use: Designed according to the ergonomics principle, it is comfortable to use.
5.Test Range: The maximum detection depth is 19mm below the surface of a uniform object, the detection range error is 3mm,
and the range of the detected object cannot be less than 1200mm.
Specifications:
Material: ABS
Color: Black Yellow
Power supply: 9V battery(not included)
Size: (Approx) 145x62x25mm/5.7x2.4x0.98inch
Package Included:
1 PC x Metal detector
1 PC x Manual
Test sampling:
Place the instrument on the surface to be tested and press the power switch. At this time,
the first indicator red and green lights are on, and a beep sounds, and then the red indicator turns off, indicating success.
When sampling, the first red indicator is red. The indicator light is always on and emits a short beep, indicating that the sampling is unsuccessful,
there is interference, or the measured object exceeds the built-in allowable value.
Test operation:
1. After the sampling is successful, do not release the power switch and move along the surface to be measured.
When the instrument senses a foreign object, the red indicator light starts to light up in sequence. When the LED is all on and emits a "drip" sound,
use a pencil Make the next mark and release the power switch.
2. Place the instrument on the opposite direction of the surface for sampling, approach the position where the mark is made,
when the instrument senses a foreign object, the red indicator light starts to light up in sequence,
when the LED is all on and emits a "drip" sound, use a pencil to do it Make the mark and release the power switch.
3. Repeat the test several times, if the alarm is issued. That is, there may be support columns (foreign objects) under the middle area.
4. When there are no metal objects or other foreign objects underneath, it will not flash and make no sound.
In order to test the results accurately, you can test several times.
#Metal #Detector #Wall #Scanner #Stud #Finder #With #Warning #Home #Electronic #Convenient #Multifunctional #Sensor #Por