Máy Đo Khoảng Cách Chơi Gôn 7x18

1 characteristics
This is a golf observation instrument measuring distances using precision optical and digital technology, this is a safe distance test device, safety is free from any form of energy radiation, there is no damage or damage to the human body during the measurement of distance activity.


2. Two functions
1). Green mode (Lawn function)
This feature is designed especially for golfers, you can easily get the distance between your holes.
2). General mode (General functions)
This function is suitable for ordinary situations, first you enter the height of the target, you can measure the distance between you and the target.


3 name of component
1). Switch/adjust key
2). Functional keys
3). Battery loading part
4). Peeping hole
5). Mirrors
Key parameters indicators:
Mirrors: 28mm
Glasses: 16mm
Resolution: 13′′;
Magnifying multiplier: 7 times
Furthest test distance: 930 yard (1 yard 0.914 m)
Perspective: 7.8°;
Power supply: Use of two cr2032
Volume: 90mm x 50mmx38mm


Methods of use
1). Press the switch/adjust key to start the instrument, ann will enter the lawn directly.
2). Used for golf:
The height of a ruler in yardstick (2.6) It 's been entered.
(1) Align the bottom line of the screen to the horizontal line of the lawn.
(2) Press the switch/adjust key to raise the position of the scan line to the top of the golf flag pole.
(3) Numbers will come out at the top of the screen, prompt you to distance from the hole.
3). Distances used to measure special targets
The instrument enters the general functional state by function key, the screen displays three digits and one decimal point.
If you want to check your target (1) Press the switch/adjust key to enter the general functional state, the screen displays three digits and one decimal point.
(2) Move to 10 digits by functional key, then press the switch/adjust key to enter the number, the range is also 0 to 9.
(3) Repeat the above steps, set the numbers and the decimal places.
(4) Click the function key to end the input process above.
(5) Depending on the height you entered, the screen displays the minimum distance you can measure.
(6) Align the bottom line of the screen with the lowest line of the target.
(7) Press the switch/adjust key to adjust the position of the scan line up to the top of the target.
(8) Numbers will appear at the top of the screen, prompt you to distance from the target. Please input its height.
5 points of note
1)... The distance shown is consistent with the input height unit.
2) 60 seconds after the operation is closed automatically.
3.) Note Please don 't watch the sun with this product for the naked eye, this can cause damage to the eyes.


Remarks: No batt