Máy Đánh Bóng Giường Ngủ Dạng Nhỏ Tiện Dụng Cho Xe Hơi

Diy
If you want to see more instruments & tools products, click # Instrumentation for changing homes
This is a mini-pearl machine, small portable size, powerful carpentry lathes and beautiful appearance. Cost-effective, quality superior, it 's a small machine that buddha pearl lovers must have.
Characteristics:
Design for family diy lovers, small portable, the size is strong.
Transparent organic dustproof glass cover, with super convection cooling holes.
The welding line covers all thermal shrinkage tubes.
7 power adapter allows you to adjust speed easily, to meet different cutting speeds.
High quality aluminum alloy base and pure steel structure drill clamp.
Super large torque ball bearing motor, maximum speed can reach 7000 rpm, provision of ultra-strong cutting power and low noise, available at home.
Product specifications:
Material: Aluminum alloy + Acrylic
Color: Silver
Type of plug: / (Optional)
Voltage: Ac 100-240v 50/60hz
Rated voltage: 12-24v dc
Rated power: 100w
Rated speed: 1500-7000 rpm
Power: 7 adjustable speed
Length of processing: 140mm/5.51 in
Diameter of processing: 55mm/2.16 in
Clamping range of clamping: 0.6-6.5mm/0.02-0.25 in
Swing diameter: Maximum 50mm/2.0 in
Length of grip: Maximum 140mm/5.51 in
Matching saw blade diameter: Maximum 50mm/2.0 in
Machine size: 325x65 x 70mm/12.8x2.6x2.8 in
Weight of machine: 1436 g/3.17 pounds
Packaging size: 37x14 x 14cm/14.6x5.5x5.5 in
Packing weight: 1734 g/3.82 pounds
List of meals:
1 x
1 x speed control power (12-24v)
6 x
1 x
3 x
1 x
1 x
Note:
- if the user does not have the basic experience of lathe, should be followed when used: Low speed, slow speed, be careful and use other safe operations.
- speed can be adjusted at 1500-7000 rpm, cutting wood should not exceed 4000, grinding can use higher speed.
- drilling pin shaft, wood shaft, the tailing center shaft of the drill should be straight, or you need to adjust nuts.
- if not cylinder, speed should be reduced.
- tail bearings without locking.
- when using tools, lock the bottom of the screw, location should be 1-1.5cm away from wood.
- if you don 't know the operation, it is best to consult professio