Máy Bơm Chìm 12v Không Chổi Than Chống Thấm Nước Cho Bể Cá
₫ 136.000
Sản phẩm Máy Bơm Chìm 12v Không Chổi Than Chống Thấm Nước Cho Bể Cá đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Name: Submersible Pump
Model number: QR30E
Material: Engineering plastics
Performance: frequency conversion
Purpose: Submersible pump
Drive way: electromagnetic
Conveying medium: Clean water pump
Impeller structure: Semi-open impeller
Impeller suction method: Single suction
Flow rate :0.24 (m3/h)
Number of impellers: 4
Lift: 3 meters (m)
Inhalation caliber: 8 (mm)
Outlet diameter: 8.5 (mm)
Structure principle: Jet pump
Number of stages: Single-stage
Voltage:12 (V)
Power: 0.042 (kw)
Features:
1.Suitable for aquariums, fountains, car cooling, computer water cooling systems and circulation systems.
2.The amphibious pump: can be used in water or in water (follow the installation instructions).
3.The enameled wire coil and circuit board are sealed with epoxy resin, and the coil adopts pure copper enameled wire, which has lower temperature rise and longer service life.
Packing list:
1*Water pump
Note:
1. Check the voltage and power of the pump before starting.
2. Cut off the power before installing/putting on/removing the pump; otherwise, the pump will not be taken out of the water because it contains air.
3. Can be used in water or other liquids (no particles and impurities); not suitable for viscous and acid-based liquids.
4. Don't burn the pump dry, otherwise it will be damaged.
5. Turn the power on and off several times to remove the air from the pump impeller and pipeline.
6. When the pump is used in a high temperature environment (100°C), it can only be installed in a non-submersible
Name: Submersible Pump
Model number: QR30E
Material: Engineering plastics
Performance: frequency conversion
Purpose: Submersible pump
Drive way: electromagnetic
Conveying medium: Clean water pump
Impeller structure: Semi-open impeller
Impeller suction method: Single suction
Flow rate :0.24 (m3/h)
Number of impellers: 4
Lift: 3 meters (m)
Inhalation caliber: 8 (mm)
Outlet diameter: 8.5 (mm)
Structure principle: Jet pump
Number of stages: Single-stage
Voltage:12 (V)
Power: 0.042 (kw)
Features:
1.Suitable for aquariums, fountains, car cooling, computer water cooling systems and circulation systems.
2.The amphibious pump: can be used in water or in water (follow the installation instructions).
3.The enameled wire coil and circuit board are sealed with epoxy resin, and the coil adopts pure copper enameled wire, which has lower temperature rise and longer service life.
Packing list:
1*Water pump
Note:
1. Check the voltage and power of the pump before starting.
2. Cut off the power before installing/putting on/removing the pump; otherwise, the pump will not be taken out of the water because it contains air.
3. Can be used in water or other liquids (no particles and impurities); not suitable for viscous and acid-based liquids.
4. Don't burn the pump dry, otherwise it will be damaged.
5. Turn the power on and off several times to remove the air from the pump impeller and pipeline.
6. When the pump is used in a high temperature environment (100°C), it can only be installed in a non-submersible
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000