Mạng Ubiquiti Eth-Sp Ethernet Surge Utp Lan Mã 964
₫ 595.000
Sản phẩm Mạng Ubiquiti Eth-Sp Ethernet Surge Utp Lan Mã 964 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Overview of ubiquiti eth-sp ethernet surge protector outdoor utp lan anti lightning
Quality: Original ubiquiti
Esd protection for outdoor high-speed networks
Introducing the ethernet surge protector, eth-sp model, from ubiquiti networks. The eth-sp is a cost-effective solution for protecting outdoor ethernet devices from damaging electrostatic diskharge and surges. Since all ubiquiti airmax devices already have robust esd protection built in, Adding the eth-sp to the installlation provides an additional layer of protection to the network.
The eth-sp is engineered to protect power-over-ethernet (poe) or non-poe devices with connection speeds of up to 1gbps. Two passive, surge-protected rj45 connections provide maximum equipment compatibility.
All ubiquiti airmax devices are equipped with esd protection However, to protect outdoor devices, and to meet certain local code requirements, installling the eth-sp is essential.
For example, To guard against costly service calls, And to help your subscriber installlations meet code requests, Installl two eth-sps: One near the cpe, And the other at the entry point to the building Damaging esd attacks and surges will be absorbed by the eth-sps and safely discharged into the ground.
Specifications:
~ eth-sp model
Dimensions: 91x61 x 32.5mm
~ esd / emp protection:
Absorbing transient current with response to
Surge voltage from 100v s to 1kv s
Dc spark-over voltage 90v @ 100v / s
Maximum impulse spark-over voltage 700v @ 1kv / s
~ rechargeable current: 5ka (maximum), 0.5ka (normal)
~ maximum insulation resistance 1g ohm @ 50v
Maximum capacity 1.0 pf @ 1 mhz
~ ieee 802.3af poe support yes
~ shock and vibration certification etsi300-019 - 1.4 standard
~ operating temperature - 30 to 65c
~ operating humidity 10 to 90% nonconde
Quality: Original ubiquiti
Esd protection for outdoor high-speed networks
Introducing the ethernet surge protector, eth-sp model, from ubiquiti networks. The eth-sp is a cost-effective solution for protecting outdoor ethernet devices from damaging electrostatic diskharge and surges. Since all ubiquiti airmax devices already have robust esd protection built in, Adding the eth-sp to the installlation provides an additional layer of protection to the network.
The eth-sp is engineered to protect power-over-ethernet (poe) or non-poe devices with connection speeds of up to 1gbps. Two passive, surge-protected rj45 connections provide maximum equipment compatibility.
All ubiquiti airmax devices are equipped with esd protection However, to protect outdoor devices, and to meet certain local code requirements, installling the eth-sp is essential.
For example, To guard against costly service calls, And to help your subscriber installlations meet code requests, Installl two eth-sps: One near the cpe, And the other at the entry point to the building Damaging esd attacks and surges will be absorbed by the eth-sps and safely discharged into the ground.
Specifications:
~ eth-sp model
Dimensions: 91x61 x 32.5mm
~ esd / emp protection:
Absorbing transient current with response to
Surge voltage from 100v s to 1kv s
Dc spark-over voltage 90v @ 100v / s
Maximum impulse spark-over voltage 700v @ 1kv / s
~ rechargeable current: 5ka (maximum), 0.5ka (normal)
~ maximum insulation resistance 1g ohm @ 50v
Maximum capacity 1.0 pf @ 1 mhz
~ ieee 802.3af poe support yes
~ shock and vibration certification etsi300-019 - 1.4 standard
~ operating temperature - 30 to 65c
~ operating humidity 10 to 90% nonconde